Open the shop

Road · 2026

Giant Defy Advanced 2

Selected build : Giant Defy Advanced 2 (2026) · Canada

Fit checks still open.

4 factory measurements on file · 1 confirmed by two independent sources. Fit is checked for each part.

Representative silhouette: Road endurance. Explore the bike’s regions.
Explore in the workshop

Shopping from Canada

Find this bike

Affiliate links. Atelier 700 earns a commission on purchases made through these links. As an Amazon Associate, we earn from qualifying purchases.

Confirm the year, build and size with the seller.

Explore its parts

On this device. No account needed.

Saving requires JavaScript. Bike details and seller links remain available without JavaScript.

Fit checks still open

4 factory measurements on file · 1 confirmed by two independent sources. Factory measurements can vary by build, original market and size.

Fit is checked for each part.

See confirmed measurements
  • Wheel size (ISO bead seat)

Find a part

Documented original equipment. Replacements and upgrades remain in the fitment lists.

Observed specification market: CA. Captured 2026-10-16T19:46:29.149421+00:00. Canadian 2026 manufacturer observation. The official page documents this model; it does not verify stock, serial-level substitutions, replacement fit or a complete service inventory. US 2025 components are not substituted into this build.

Factory build : Canada · Shopping : Canada

Identify a changed component

Documented factory parts for this build

Select a size to include size-dependent parts.

PositionOriginal equipment
FrameAdvanced-grade composite frame · 12 × 142 mm ×1
ForkAdvanced composite OverDrive fork · 12 × 100 mm ×1
CockpitStratus Lite 3.0 bar tape ×1
SeatpostComposite D-Fuse seatpost · 14 mm offset ×1
SaddleGiant Approach saddle ×1
CockpitShimano 105 shift controls ×1
DrivetrainShimano 105 front derailleur ×1
Rear derailleurShimano 105 rear derailleur ×1
CockpitShimano 105 brake controls ×1
CassetteShimano 105 cassette · 11–36 ×1
DrivetrainKMC X12L-1 chain ×1
CranksetShimano press-fit bottom bracket · standard unconfirmed ×1
Front brakeShimano 105 hydraulic brake · front ×1
Front brakeShimano SM-RT64 rotor · 160 mm · front ×1
Front wheelGiant P-R1 alloy rim · 25 mm · front ×1
Front wheelGiant alloy hub · 12 mm thru-axle · front ×1
Front wheelSapim spokes · front ×1
Front wheelGavia Fondo 1 tyre · 700 × 32c · front ×1
Rear brakeShimano 105 hydraulic brake · rear ×1
Rear brakeShimano SM-RT64 rotor · 160 mm · rear ×1
Rear wheelGiant P-R1 alloy rim · 25 mm · rear ×1
Rear wheelGiant alloy hub · 12 mm thru-axle · rear ×1
Rear wheelSapim spokes · rear ×1
Rear wheelGavia Fondo 1 tyre · 700 × 32c · rear ×1
BackReset view

No documented exploded view for this assembly.

Coverage and remaining work

Size-dependent parts are excluded until you select a size.

Factory assemblies
24 · inventory incomplete
Parts with a drawing or manual
10/32
Components with a service manual
0/32 · 0 indexed procedures
Parts selectable in a schematic assembly
8/40
Parts with reviewed exact geometry
0/40
Exact purchase destinations
0/32 · 0 via kit
  • Canadian 2026 manufacturer observation. The official page documents this model; it does not verify stock, serial-level substitutions, replacement fit or a complete service inventory. US 2025 components are not substituted into this build.
  • No independent fit verification, qualified technical review or exact service geometry is recorded. HTML and PDF are one manufacturer, not independent corroboration.
  • Complete hardware, hub/axle internals, tool and torque inventory is missing. Pedal supply, retail packages and Amazon ASINs are unconfirmed.
  • The handlebar component table and geometry width row use different notation. Confirm the actual handlebar measurement and variant before ordering.
  • The current Canadian page describes rims optimized for tyres up to38mm while its specification table gives40mm maximum tyre clearance. The intended conditions and exact maximum need manufacturer clarification; the held40mm claim is not reapproved.
Complete documented parts tree — usable without 3D

Documented specifications

The Giant Defy Advanced 2 (2026) is a road bike. Documented measurements and parts apply to their specific build, original market and size. Each configuration’s inventory carries its details and sources.

Rear axle spacingThru-axle, 142 × 12 mm
Maximum tyre width (frame)40 mm
Wheel size (ISO bead seat)700c / 29" (ISO 622)
Front axle spacingThru-axle, 100 × 12 mm
Brake actuationHydraulic disc

Confidence: every fact above comes from a single cited source — "derived" on our lattice; none is verified by a second independent publisher yet. A verdict that rests on a safety-critical fact therefore stops at "unknown" rather than "fits".

Fit measurements to check: Bottom bracket shell · Derailleur hanger · Seatpost diameter · Brake mount, front · Brake mount, rear · Freehub body · Rear speeds · Chain standard · Pedal thread. The sheet we read does not state them; until a source does, confirm these measurements before choosing a part that depends on them.

Why do so many verdicts on this bike read "unknown"?
Because a verdict needs the bike's measurement for every dimension a part requires, and 10 of the 14 required measurements are not on file. "Unknown" means we could not check — not that it fits, and not that it does not.
Will the verdicts change?
Yes. When a second independent source confirms a measurement — or a first one states a missing one — the verdicts are recomputed from the new facts. Nothing on this page is typed by hand.

Regions of this bike

Fit measurements to check

  • Bottom bracket shell
  • Derailleur hanger
  • Seatpost diameter
  • Brake mount, front
  • Brake mount, rear
  • Freehub body
  • Rear speeds
  • Chain standard
  • Pedal thread

Sources

The spec sheets we read. Every fact above cites one of them.

Source limitations: Canadian 2026 manufacturer observation. The official page documents this model; it does not verify stock, serial-level substitutions, replacement fit or a complete service inventory. US 2025 components are not substituted into this build. Bottom bracket shell, steerer diameters, D-Fuse clamp dimensions, crank and derailleur MPNs, axle threads and wheel internals are not specified. The component and geometry tables use different handlebar width notation; confirm the actual bar before ordering.

The shop · Atelier 700