Open the shop

City & commuting · 2024

Giant Escape 3

Fit checks still open.

8 factory measurements on file · 6 confirmed by two independent sources. Fit is checked for each part.

Representative silhouette: Flat-bar commuter. Explore the bike’s regions.
Explore in the workshop

Shopping from Canada

Find this bike

Affiliate links. Atelier 700 earns a commission on purchases made through these links. As an Amazon Associate, we earn from qualifying purchases.

Confirm the year, build and size with the seller.

Explore its parts

On this device. No account needed.

Saving requires JavaScript. Bike details and seller links remain available without JavaScript.

Fit checks still open

8 factory measurements on file · 6 confirmed by two independent sources. Factory measurements can vary by build, original market and size.

Fit is checked for each part.

See confirmed measurements
  • Wheel size (ISO bead seat)
  • Brake mount, front
  • Brake mount, rear
  • Rotor interface (hubs)
  • Brake actuation
  • Rear speeds

Find a part

Choose your bike’s documented factory build.

Documented specifications

United States · Giant Escape 3
These details describe this reference build. They do not automatically apply to another market or build.

The Giant Escape 3 (2024) is a commuter bike. Documented measurements and parts apply to their specific build, original market and size. Each configuration’s inventory carries its details and sources.

Seatpost diameter27.2 mm
Seatpost shapeRound
Maximum tyre width (frame)45 mm
Wheel size (ISO bead seat)700c / 29" (ISO 622)
Brake mount, frontCantilever / V-brake posts
Brake mount, rearCantilever / V-brake posts
Rotor interface (hubs)No rotor interface (rim brake)
Brake actuationCable rim brake
Brake pad shape (fitted calipers)Rim pads: V-brake / linear-pull threaded stud (M70T4 / S70C, 70 mm)
Freehub bodyThreaded freewheel hub (1.37" × 24 tpi)
Rear speeds7 speeds
Shift actuationMechanical (cable)
Chain standard6 / 7 / 8-speed
Stem bar-clamp diameter (fitted stem)25.4 mm
Handlebar clamp diameter (fitted bar)25.4 mm

Confidence: every fact above comes from a single cited source — "derived" on our lattice; none is verified by a second independent publisher yet. A verdict that rests on a safety-critical fact therefore stops at "unknown" rather than "fits".

Fit measurements to check: Bottom bracket shell · Derailleur hanger · Rear axle spacing · Front axle spacing · Pedal thread. The sheets we read do not state them; until a source does, confirm these measurements before choosing a part that depends on them.

Why do so many verdicts on this bike read "unknown"?
Because a verdict needs the bike's measurement for every dimension a part requires, and 8 of the 16 required measurements are not on file. "Unknown" means we could not check — not that it fits, and not that it does not.
Will the verdicts change?
Yes. When a second independent source confirms a measurement — or a first one states a missing one — the verdicts are recomputed from the new facts. Nothing on this page is typed by hand.

Regions of this bike

Fit measurements to check

  • Bottom bracket shell
  • Derailleur hanger
  • Rear axle spacing
  • Front axle spacing
  • Pedal thread

Sources

The spec sheets we read. Every fact above cites one of them.

Source limitations: Left absent: axle spacings (hubs line says 'alloy, 32h' only), steerer, bb_shell ('cartridge' only), pedal thread.

The shop · Atelier 700