Atelier 700Open the shop

Gravel & mixed roads · 2026

Giant Revolt 2

Selected build : Giant Revolt 2 (2026) · CA · incomplete observation · Canada

We have not verified this bike yet.

0 of the 16 measurements on file · 0 verified. Fit is checked for each part.

Representative silhouette: Gravel. Explore the bike’s regions.
Explore in the workshop

Shopping from Canada

Find this bike

Confirm the year, build and size with the seller.

Explore its parts

On this device. No account needed.

Saving requires JavaScript. Bike details and seller links remain available without JavaScript.

We have not verified this bike yet

0 of the 16 measurements are on file; 0 confirmed by two independent sources.

A documented replacement can be recommended even while unrelated bike measurements are missing.

Find a part

My build and size · Giant Revolt 2 (2026) · CA · incomplete observation

Documented original equipment. Replacements and upgrades remain in the fitment lists.

Observed specification market: CA. Captured 2026-10-07T22:52:57+00:00. Canadian 2026 specification observation. Exact retail packages, serial-level factory substitutions and internal service parts remain unverified. Tire clearance depends on the flip-chip and drivetrain; the 53 mm marketing maximum is not a verified 2x clearance.

Identify a changed component

Documented factory parts for this build

Select a size to include size-dependent parts.

PositionOriginal equipment
FrameALUXX frame; 12 × 142 mm rear interface; flip-chip ×1
ForkComposite OverDrive fork; 12 mm axle interface ×1
CockpitContact XR Ergo-Control handlebar; 31.8 mm ×1
CockpitGel cork handlebar tape ×1
CockpitContact stem; 8° ×1
SeatpostD-Fuse alloy seatpost; 14 mm offset ×1
SaddleGrit saddle ×1
CockpitU3030 integrated controls; 2 × 9 ×1
DrivetrainU6030 front derailleur ×1
Rear derailleurU4020 rear derailleur ×1
Front brakeRS305 front mechanical brake ×1
Rear brakeRS305 rear mechanical brake ×1
Front brakeMPH front rotor; 160 mm ×1
Rear brakeMPH rear rotor; 160 mm ×1
CassetteCS-LG300 cassette; 11–36 ×1
DrivetrainX11 chain ×1
CranksetFC-U6030-2 crankset; 32/46 ×1
CranksetThreaded bottom bracket; exact model unspecified ×1
Front wheelS-X2 alloy front rim ×1
Rear wheelS-X2 alloy rear rim ×1
Front wheelAlloy front hub; 12 mm thru-axle interface ×1
Rear wheelAlloy rear hub; 12 mm thru-axle interface ×1
Front wheelFront stainless spoke assembly; count and lengths unspecified ×1
Rear wheelRear stainless spoke assembly; count and lengths unspecified ×1
Front wheelCrossCut AT2 front tyre; tubeless 700 × 38 ×1
Rear wheelCrossCut AT2 rear tyre; tubeless 700 × 38 ×1
BackReset view

No documented exploded view for this assembly.

Coverage and remaining work

Size-dependent parts are excluded until you select a size.

Factory assemblies
26 · inventory incomplete
Parts with a drawing or manual
0/26
Components with a service manual
0/26 · 0 indexed procedures
Parts selectable in a schematic assembly
0/26
Parts with reviewed exact geometry
0/26
Exact purchase destinations
0/26 · 0 via kit
  • Canadian 2026 specification observation. Exact retail packages, serial-level factory substitutions and internal service parts remain unverified. Tire clearance depends on the flip-chip and drivetrain; the 53 mm marketing maximum is not a verified 2x clearance.
  • The complete manufacturer service inventory is missing. Unresolved checklist entries are research questions, not assertions that an undocumented item is fitted.
  • All observed roots require identification; no independent interface validation, exact service geometry or qualified technical review has been recorded.
Complete documented parts tree — usable without 3D

Documented specifications

The Giant Revolt 2 (2026) is a gravel bike — representative silhouette: Gravel. We have read 0 specification sheets () and recorded 0 fit facts from them. 0 of the 16 measurements a gravel bike needs to answer fit questions are on file; 0 are confirmed by two independent sources. Where a measurement is missing, we say so below — we do not guess.

No fit fact is on file for this bike yet.

Not on file (required for a gravel bike): Bottom bracket shell · Derailleur hanger · Rear axle spacing · Seatpost diameter · Maximum tyre width (frame) · Wheel size (ISO bead seat) · Front axle spacing · Brake mount, front · Brake mount, rear · Rotor interface (hubs) · Brake actuation · Brake pad shape (fitted calipers) · Freehub body · Rear speeds · Chain standard · Pedal thread. The sheets we read do not state them; until a source does, confirm these measurements before choosing a part that depends on them.

Why do so many verdicts on this bike read "unknown"?
Because a verdict needs the bike's measurement for every dimension a part requires, and 16 of the 16 required measurements are not on file. "Unknown" means we could not check — not that it fits, and not that it does not.
Will the verdicts change?
Yes. When a second independent source confirms a measurement — or a first one states a missing one — the verdicts are recomputed from the new facts. Nothing on this page is typed by hand.

Regions of this bike

Not on file (required)

  • Bottom bracket shell
  • Derailleur hanger
  • Rear axle spacing
  • Seatpost diameter
  • Maximum tyre width (frame)
  • Wheel size (ISO bead seat)
  • Front axle spacing
  • Brake mount, front
  • Brake mount, rear
  • Rotor interface (hubs)
  • Brake actuation
  • Brake pad shape (fitted calipers)
  • Freehub body
  • Rear speeds
  • Chain standard
  • Pedal thread

The shop · Atelier 700