Atelier 700Open the shop

Rear wheel parts for the Kona Process 134

We have not verified this bike yet

0 of the 16 measurements are on file; 0 confirmed by two independent sources.

A documented replacement can be recommended even while unrelated bike measurements are missing.

Kona Process 134

Parts menu — 35 parts

  • DT Swiss P 1800 SPLINE db 23 rear wheel, 12×142 mm, Shimano HG11

    Rear wheel

    Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.

    • Rear axle spacing : Thru-axle, 142 × 12 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet.
    • Freehub body : Shimano HG, 11-speed road body (+1.85 mm)Check your installed setup or its technical sheet.
    • Rotor interface, rear hub : Center LockCheck your installed setup or its technical sheet.
    • Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet.
    • Electric assist system : No electric assistCheck your installed setup or its technical sheet.
    • Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet.
    • Fitted rear tyre width : 23–56 mmCheck your installed setup or its technical sheet.
    Why? The facts we compared (8 dimensions compared)
    • Rear axle spacing (safety-critical): bike nothing on file · part Thru-axle, 142 × 12 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
    • Freehub body: bike nothing on file · part Shimano HG, 11-speed road body (+1.85 mm) — not on file
    • Rotor interface, rear hub (safety-critical): bike nothing on file · part Center Lock — not on file
    • Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file
    • Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file
    • Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file
    • Fitted rear tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file

    Sources:

    View specifications

  • Maxxis Assegai 27.5×2.50 WT (63-584)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 63 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 650b / 27.5" (ISO 584)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 63 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 650b / 27.5" (ISO 584) — not on file

    Sources:

    View specifications

  • Maxxis Assegai 29×2.50 WT (63-622)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 63 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 63 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file

    Sources:

    View specifications

  • Maxxis DTH 20×1.75 (44-406)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 44 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 20" / BMX (ISO 406)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 44 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 20" / BMX (ISO 406) — not on file

    Sources:

    View specifications

  • Maxxis DTH 24×1.75 (44-507)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 44 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 24" (ISO 507)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 44 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 24" (ISO 507) — not on file

    Sources:

    View specifications

  • Maxxis High Road Gen 2 700×28C (28-622)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 28 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 28 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file

    Sources:

    View specifications

  • Maxxis High Road Gen 2 700×32C (32-622)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 32 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 32 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file

    Sources:

    View specifications

  • Maxxis Holy Roller 20×1 3/8 (37-451)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 37 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 20" 451 (ISO 451)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 37 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 20" 451 (ISO 451) — not on file

    Sources:

    View specifications

  • Maxxis Holy Roller 20×1.95 (53-406)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 53 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 20" / BMX (ISO 406)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 53 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 20" / BMX (ISO 406) — not on file

    Sources:

    View specifications

  • Maxxis Holy Roller 24×1.85 (50-507)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 50 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 24" (ISO 507)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 50 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 24" (ISO 507) — not on file

    Sources:

    View specifications

  • Maxxis Minion DHF 27.5×2.50 WT (63-584)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 63 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 650b / 27.5" (ISO 584)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 63 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 650b / 27.5" (ISO 584) — not on file

    Sources:

    View specifications

  • Maxxis Minion DHF 29×2.30 (58-622)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 58 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 58 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file

    Sources:

    View specifications

  • Maxxis Minion DHF 29×2.50 WT (63-622)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 63 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 63 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file

    Sources:

    View specifications

  • Maxxis Rambler 650B×47 (47-584)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 47 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 650b / 27.5" (ISO 584)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 47 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 650b / 27.5" (ISO 584) — not on file

    Sources:

    View specifications

  • Maxxis Rambler 700×40C (40-622)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 40 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 40 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file

    Sources:

    View specifications

  • Maxxis Rambler 700×45C (45-622)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 45 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 45 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file

    Sources:

    View specifications

  • Maxxis Rambler 700×50C (50-622)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 50 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 50 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file

    Sources:

    View specifications

  • Maxxis Re-Fuse 700×25C (25-622)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 25 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 25 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file

    Sources:

    View specifications

  • Maxxis Re-Fuse 700×28C (28-622)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 28 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 28 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file

    Sources:

    View specifications

  • Maxxis Re-Fuse 700×32C (32-622)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 32 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 32 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file

    Sources:

    View specifications

  • Maxxis Re-Fuse 700×40C (40-622)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 40 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 40 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file

    Sources:

    View specifications

  • Maxxis Rekon 27.5×2.40 (61-584)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 61 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 650b / 27.5" (ISO 584)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 61 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 650b / 27.5" (ISO 584) — not on file

    Sources:

    View specifications

  • Maxxis Rekon 29×2.40 (61-622)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 61 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 61 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file

    Sources:

    View specifications

  • Maxxis Welter Weight tube 20×1.5/2.5, Schrader 32 mm

    Inner tube

    Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.

    • Wheel size (ISO bead seat) : 20" / BMX (ISO 406)Check your installed setup or its technical sheet.
    • Fitted rear tyre width : —Check your installed setup or its technical sheet.
    • Rear rim valve interface : Check your installed setup or its technical sheet.
    Why? The facts we compared (3 dimensions compared)
    • Wheel size (ISO bead seat): bike nothing on file · part 20" / BMX (ISO 406) — not on file
    • Fitted rear tyre width (safety-critical): bike nothing on file · part — — not on file
    • Rear rim valve interface: bike nothing on file · part — not on file

    Sources:

    View specifications

  • Maxxis Welter Weight tube 24×1.5/2.5, Schrader 32 mm

    Inner tube

    Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.

    • Wheel size (ISO bead seat) : 24" (ISO 507)Check your installed setup or its technical sheet.
    • Fitted rear tyre width : —Check your installed setup or its technical sheet.
    • Rear rim valve interface : Check your installed setup or its technical sheet.
    Why? The facts we compared (3 dimensions compared)
    • Wheel size (ISO bead seat): bike nothing on file · part 24" (ISO 507) — not on file
    • Fitted rear tyre width (safety-critical): bike nothing on file · part — — not on file
    • Rear rim valve interface: bike nothing on file · part — not on file

    Sources:

    View specifications

  • Maxxis Welter Weight tube 26×1.50/2.50, Presta 48 mm

    Inner tube

    Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.

    • Wheel size (ISO bead seat) : 26" MTB (ISO 559)Check your installed setup or its technical sheet.
    • Fitted rear tyre width : —Check your installed setup or its technical sheet.
    • Rear rim valve interface : Check your installed setup or its technical sheet.
    Why? The facts we compared (3 dimensions compared)
    • Wheel size (ISO bead seat): bike nothing on file · part 26" MTB (ISO 559) — not on file
    • Fitted rear tyre width (safety-critical): bike nothing on file · part — — not on file
    • Rear rim valve interface: bike nothing on file · part — not on file

    Sources:

    View specifications

  • Maxxis Welter Weight tube 27.5×1.75/2.4, Presta 48 mm

    Inner tube

    Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.

    • Wheel size (ISO bead seat) : 650b / 27.5" (ISO 584)Check your installed setup or its technical sheet.
    • Fitted rear tyre width : —Check your installed setup or its technical sheet.
    • Rear rim valve interface : Check your installed setup or its technical sheet.
    Why? The facts we compared (3 dimensions compared)
    • Wheel size (ISO bead seat): bike nothing on file · part 650b / 27.5" (ISO 584) — not on file
    • Fitted rear tyre width (safety-critical): bike nothing on file · part — — not on file
    • Rear rim valve interface: bike nothing on file · part — not on file

    Sources:

    View specifications

  • Maxxis Welter Weight tube 29×1.75/2.4, Presta 48 mm

    Inner tube

    Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.

    • Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet.
    • Fitted rear tyre width : —Check your installed setup or its technical sheet.
    • Rear rim valve interface : Check your installed setup or its technical sheet.
    Why? The facts we compared (3 dimensions compared)
    • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
    • Fitted rear tyre width (safety-critical): bike nothing on file · part — — not on file
    • Rear rim valve interface: bike nothing on file · part — not on file

    Sources:

    View specifications

  • Maxxis Welter Weight tube 700×23/32, Presta 60 mm

    Inner tube

    Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.

    • Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet.
    • Fitted rear tyre width : —Check your installed setup or its technical sheet.
    • Rear rim valve interface : Check your installed setup or its technical sheet.
    Why? The facts we compared (3 dimensions compared)
    • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
    • Fitted rear tyre width (safety-critical): bike nothing on file · part — — not on file
    • Rear rim valve interface: bike nothing on file · part — not on file

    Sources:

    View specifications

  • Maxxis Welter Weight tube 700×33/50, Presta 48 mm

    Inner tube

    Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.

    • Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet.
    • Fitted rear tyre width : —Check your installed setup or its technical sheet.
    • Rear rim valve interface : Check your installed setup or its technical sheet.
    Why? The facts we compared (3 dimensions compared)
    • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
    • Fitted rear tyre width (safety-critical): bike nothing on file · part — — not on file
    • Rear rim valve interface: bike nothing on file · part — not on file

    Sources:

    View specifications

  • Wolf Tooth Rear Axle for Syntace X-12, 12×142 mm, 159 mm, AXLE12-159-100-X12

    Rear thru-axle

    Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.

    • Rear axle spacing : Thru-axle, 142 × 12 mmCheck your installed setup or its technical sheet.
    • Rear thru-axle thread : M12 × 1.0Check your installed setup or its technical sheet.
    • Rear thru-axle length : 159 mmCheck your installed setup or its technical sheet.
    • Rear thru-axle head seat : Syntace X-12 conical seatCheck your installed setup or its technical sheet.
    • Rear axle threaded portion length : 12 mmCheck your installed setup or its technical sheet.
    Why? The facts we compared (5 dimensions compared)
    • Rear axle spacing (safety-critical): bike nothing on file · part Thru-axle, 142 × 12 mm — not on file
    • Rear thru-axle thread (safety-critical): bike nothing on file · part M12 × 1.0 — not on file
    • Rear thru-axle length (safety-critical): bike nothing on file · part 159 mm — not on file
    • Rear thru-axle head seat (safety-critical): bike nothing on file · part Syntace X-12 conical seat — not on file
    • Rear axle threaded portion length (safety-critical): bike nothing on file · part 12 mm — not on file

    Sources:

    View specifications

  • WTB Riddler 29×2.25 TCS Light/Fast Rolling (54-622)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 54 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 54 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file

    Sources:

    View specifications

  • WTB Venture 40×700 TCS Light/Fast Rolling (37-622)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 37 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 37 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file

    Sources:

    View specifications

  • WTB Venture 47×650 TCS Light/Fast Rolling (44-584)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 44 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 650b / 27.5" (ISO 584)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 44 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 650b / 27.5" (ISO 584) — not on file

    Sources:

    View specifications

  • WTB Venture 50×700 TCS Light/Fast Rolling (47-622)

    Tyre

    unknown · confidence: single-source

    • Maximum tyre width (frame) : ≥ 47 mmCheck your installed setup or its technical sheet.
    • Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet.
    Why? The facts we compared (2 dimensions compared)
    • Maximum tyre width (frame): bike nothing on file · part ≥ 47 mm — not on file
    • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file

    Sources:

    View specifications

Slots in this region

  • Rear wheel
  • Rear thru-axle
  • Tyre
  • Inner tube

The rear wheel of the Kona Process 134: 4 slots — Rear wheel, Rear thru-axle, Tyre and Inner tube. 0 fit facts on file for this region. The parts menu below lists every catalogued part that belongs here with its computed verdict — fits, fits with adapter, does not fit or unknown — and why.

Mounting measurements for this area of the Kona Process 134 still need documentation. Affected parts show the checks required before purchase or installation; a product specification alone does not confirm fit.

What does "unknown" mean on this page?
That we do not have, on file, the bike measurement this part needs. It is not a quiet "yes": until the measurement is on file, we do not sell the part for this bike.

The shop · Atelier 700