Open the shop

Road · 2025

Giant Defy Advanced 2

Fit checks still open.

8 factory measurements on file · 1 confirmed by two independent sources. Fit is checked for each part.

Representative silhouette: Road endurance. Explore the bike’s regions.
Explore in the workshop

Market: UK

Find this bike

Affiliate links. Atelier 700 earns a commission on purchases made through these links. As an Amazon Associate, we earn from qualifying purchases.

Confirm the year, build and size with the seller.

Explore its parts

On this device. No account needed.

Saving requires JavaScript. Bike details and seller links remain available without JavaScript.

Fit checks still open

8 factory measurements on file · 1 confirmed by two independent sources. Factory measurements can vary by build, original market and size.

Fit is checked for each part.

See confirmed measurements
  • Wheel size (ISO bead seat)

Find a part

Choose your bike’s documented factory build.

Documented specifications

United States · Giant Defy Advanced 2
These details describe this reference build. They do not automatically apply to another market or build.

The Giant Defy Advanced 2 (2025) is a road bike. Documented measurements and parts apply to their specific build, original market and size. Each configuration’s inventory carries its details and sources.

Rear axle spacingThru-axle, 142 × 12 mm
Seatpost shapeD-shaped
Wheel size (ISO bead seat)700c / 29" (ISO 622)
Front axle spacingThru-axle, 100 × 12 mm
Brake actuationHydraulic disc
Freehub bodyShimano HG, 11-speed road body (+1.85 mm)
Rear speeds12 speeds
Crank spindleShimano Hollowtech II, 24 mm
Chain standard12-speed HG+ / Eagle (5.25 mm)
Tubeless-ready rimsTubeless-ready

Confidence: every fact above comes from a single cited source — "derived" on our lattice; none is verified by a second independent publisher yet. A verdict that rests on a safety-critical fact therefore stops at "unknown" rather than "fits".

Fit measurements to check: Bottom bracket shell · Derailleur hanger · Maximum tyre width (frame) · Brake mount, front · Brake mount, rear · Pedal thread. The sheet we read does not state them; until a source does, confirm these measurements before choosing a part that depends on them.

Why do so many verdicts on this bike read "unknown"?
Because a verdict needs the bike's measurement for every dimension a part requires, and 6 of the 14 required measurements are not on file. "Unknown" means we could not check — not that it fits, and not that it does not.
Will the verdicts change?
Yes. When a second independent source confirms a measurement — or a first one states a missing one — the verdicts are recomputed from the new facts. Nothing on this page is typed by hand.

Regions of this bike

Fit measurements to check

  • Bottom bracket shell
  • Derailleur hanger
  • Maximum tyre width (frame)
  • Brake mount, front
  • Brake mount, rear
  • Pedal thread

Sources

The spec sheets we read. Every fact above cites one of them.

Source limitations: Left absent on purpose: bb_shell (page says only 'Shimano, press fit'), steerer (page says 'OverDrive steerer' without diameters), brake mounts / rotor interface / max rotor (not stated; 160 mm rotors are fitted, not a maximum), max_tyre_mm (the page prints two numbers — 40 mm in the Max Tire Clearance row and 38 mm in Extras — so neither is recorded), bar/stem clamps (Contact SL D-Fuse / Contact AeroLight are proprietary and the clamp is not stated).

The shop · Atelier 700