Open the shop

Mountain · 2025

Giant Glory Advanced

Fit checks still open.

15 factory measurements on file · 12 confirmed by two independent sources. Fit is checked for each part.

Representative silhouette: Downhill. Explore the bike’s regions.
Explore in the workshop

Market: UK

Find this bike

Affiliate links. Atelier 700 earns a commission on purchases made through these links. As an Amazon Associate, we earn from qualifying purchases.

Confirm the year, build and size with the seller.

Explore its parts

On this device. No account needed.

Saving requires JavaScript. Bike details and seller links remain available without JavaScript.

Fit checks still open

15 factory measurements on file · 12 confirmed by two independent sources. Factory measurements can vary by build, original market and size.

Fit is checked for each part.

See confirmed measurements
  • Bottom bracket shell
  • Derailleur hanger
  • Rear axle spacing
  • Wheel size (ISO bead seat)
  • Front axle spacing
  • Brake mount, front
  • Brake mount, rear
  • Rotor interface (hubs)
  • Brake actuation
  • Rear speeds
  • Chain standard
  • Pedal thread

Find a part

Choose your bike’s documented factory build.

Documented specifications

United States · Giant Glory Advanced
These details describe this reference build. They do not automatically apply to another market or build.

The Giant Glory Advanced (2025) is a downhill bike. Documented measurements and parts apply to their specific build, original market and size. Each configuration’s inventory carries its details and sources.

Bottom bracket shellBSA / English threaded, 83 mm
Front derailleur mountNo front derailleur mount (1x only)
Rear axle spacingThru-axle, 157 × 12 mm (Super Boost)
Seatpost diameter30.9 mm
Seatpost shapeRound
Maximum tyre width (frame)63.5 mm
Wheel size (ISO bead seat)650b / 27.5" (ISO 584)
Maximum chainring36 t
Front axle spacingThru-axle, 110 × 20 mm (Boost / DH)
Rotor interface (hubs)6-bolt (ISO)
Brake actuationHydraulic disc
Brake pad shape (fitted calipers)Shimano D-type (Saint/Zee/4-piston: D02S/D03S)
Rear speeds7 speeds
Chainline56.5 mm
Crank spindleSRAM DUB (28.99 mm)
Chain standard11-speed (5.5 mm)
Rim internal width30 mm
Tubeless-ready rimsTubeless-ready
Stem bar-clamp diameter (fitted stem)35 mm
Handlebar clamp diameter (fitted bar)35 mm

Confidence: every fact above comes from a single cited source — "derived" on our lattice; none is verified by a second independent publisher yet. A verdict that rests on a safety-critical fact therefore stops at "unknown" rather than "fits".

Fit measurements to check: Freehub body. The sheet we read does not state it; until a source does, confirm these measurements before choosing a part that depends on them.

Why do so many verdicts on this bike read "unknown"?
Because a verdict needs the bike's measurement for every dimension a part requires, and 1 of the 16 required measurements are not on file. "Unknown" means we could not check — not that it fits, and not that it does not.
Will the verdicts change?
Yes. When a second independent source confirms a measurement — or a first one states a missing one — the verdicts are recomputed from the new facts. Nothing on this page is typed by hand.

Regions of this bike

Fit measurements to check

  • Freehub body

Sources

The spec sheets we read. Every fact above cites one of them.

Source limitations: Left absent: steerer (not stated), brake mounts, max rotor (220/203 are fitted sizes, not maxima). Wheel size is 29 front / 27.5 rear; the bike-level wheel_size fact records the REAR wheel (tyre slot = rear wheel).

The shop · Atelier 700