Open the shop

Electric · 2026

Giant Talon E+

Fit checks still open.

11 factory measurements on file · 4 confirmed by two independent sources. Fit is checked for each part.

Representative silhouette: Electric mountain. Explore the bike’s regions.
Explore in the workshop

Market: UK

Find this bike

Affiliate links. Atelier 700 earns a commission on purchases made through these links. As an Amazon Associate, we earn from qualifying purchases.

Confirm the year, build and size with the seller.

Explore its parts

On this device. No account needed.

Saving requires JavaScript. Bike details and seller links remain available without JavaScript.

Fit checks still open

11 factory measurements on file · 4 confirmed by two independent sources. Factory measurements can vary by build, original market and size.

Fit is checked for each part.

See confirmed measurements
  • Wheel size (ISO bead seat)
  • Brake actuation
  • Brake pad shape (fitted calipers)
  • Chain standard

Find a part

Choose your bike’s documented factory build.

Documented specifications

United States · Giant Talon E+
These details describe this reference build. They do not automatically apply to another market or build.

The Giant Talon E+ (2026) is a electric mountain bike. Documented measurements and parts apply to their specific build, original market and size. Each configuration’s inventory carries its details and sources.

Bottom bracket shellMid-drive motor (no conventional shell)
Front derailleur mountNo front derailleur mount (1x only)
Rear axle spacingThru-axle, 148 × 12 mm (Boost)
Seatpost diameter30.9 mm
Seatpost shapeRound
Wheel size (ISO bead seat)700c / 29" (ISO 622)
Steerer tubeTapered 1-1/8" to 1-1/2"
Front axle spacingThru-axle, 110 × 15 mm (Boost)
Rotor interface (hubs)6-bolt (ISO)
Brake actuationHydraulic disc
Brake pad shape (fitted calipers)Shimano B-type (Deore/Alivio/Acera/Altus/MT: B01S/B03S/B05S)
Freehub bodyShimano HG, 8/9/10-speed body (also 11/12-speed MTB HG cassettes)
Rear speeds9 speeds
Shift actuationMechanical (cable)
Chain standard9-speed (6.6 mm)
Stem bar-clamp diameter (fitted stem)31.8 mm
Handlebar clamp diameter (fitted bar)31.8 mm

Confidence: every fact above comes from a single cited source — "derived" on our lattice; none is verified by a second independent publisher yet. A verdict that rests on a safety-critical fact therefore stops at "unknown" rather than "fits".

Fit measurements to check: Derailleur hanger · Maximum tyre width (frame) · Brake mount, front · Brake mount, rear · Pedal thread. The sheet we read does not state them; until a source does, confirm these measurements before choosing a part that depends on them.

Why do so many verdicts on this bike read "unknown"?
Because a verdict needs the bike's measurement for every dimension a part requires, and 5 of the 16 required measurements are not on file. "Unknown" means we could not check — not that it fits, and not that it does not.
Will the verdicts change?
Yes. When a second independent source confirms a measurement — or a first one states a missing one — the verdicts are recomputed from the new facts. Nothing on this page is typed by hand.

Regions of this bike

Fit measurements to check

  • Derailleur hanger
  • Maximum tyre width (frame)
  • Brake mount, front
  • Brake mount, rear
  • Pedal thread

Sources

The spec sheets we read. Every fact above cites one of them.

Source limitations: Left absent: brake mounts, max rotor (180 mm is the fitted size), max tyre (not stated; 29x2.4 fitted), bcd (Giant motor direct-mount ring, standard not named).

The shop · Atelier 700