Open the shop

Touring & bikepacking

Kona Sutra

Fit checks still open.

10 factory measurements on file · 1 confirmed by two independent sources. Fit is checked for each part.

Model year not documented

Representative silhouette: Touring. Explore the bike’s regions.
Explore in the workshop

Market: UK

Find this bike

Affiliate links. Atelier 700 earns a commission on purchases made through these links. As an Amazon Associate, we earn from qualifying purchases.

Confirm the year, build and size with the seller.

Explore its parts

On this device. No account needed.

Saving requires JavaScript. Bike details and seller links remain available without JavaScript.

Fit checks still open

10 factory measurements on file · 1 confirmed by two independent sources. Factory measurements can vary by build, original market and size.

Fit is checked for each part.

See confirmed measurements
  • Chain standard

Find a part

Choose your bike’s documented factory build.

Documented specifications

United States · Kona Sutra
These details describe this reference build. They do not automatically apply to another market or build.

The Kona Sutra is a touring bike. Documented measurements and parts apply to their specific build, original market and size. Each configuration’s inventory carries its details and sources.

Rear axle spacingThru-axle, 142 × 12 mm
Seatpost diameter27.2 mm
Seatpost shapeRound
Maximum tyre width (frame)40 mm
Wheel size (ISO bead seat)700c / 29" (ISO 622)
Front axle spacingThru-axle, 100 × 12 mm
Freehub bodyShimano HG, 8/9/10-speed body (also 11/12-speed MTB HG cassettes)
Rear speeds10 speeds
Shift actuationMechanical (cable)
Chain standard10-speed (6.0 mm)
Rim internal width23 mm
Tubeless-ready rimsTubeless-ready

Confidence: every fact above comes from a single cited source — "derived" on our lattice; none is verified by a second independent publisher yet. A verdict that rests on a safety-critical fact therefore stops at "unknown" rather than "fits".

Fit measurements to check: Derailleur hanger · Brake mount, front · Brake mount, rear · Rotor interface (hubs) · Brake pad shape (fitted calipers) · Pedal thread. The sheet we read does not state them; until a source does, confirm these measurements before choosing a part that depends on them.

Why do so many verdicts on this bike read "unknown"?
Because a verdict needs the bike's measurement for every dimension a part requires, and 6 of the 16 required measurements are not on file. "Unknown" means we could not check — not that it fits, and not that it does not.
Will the verdicts change?
Yes. When a second independent source confirms a measurement — or a first one states a missing one — the verdicts are recomputed from the new facts. Nothing on this page is typed by hand.

Regions of this bike

Fit measurements to check

  • Derailleur hanger
  • Brake mount, front
  • Brake mount, rear
  • Rotor interface (hubs)
  • Brake pad shape (fitted calipers)
  • Pedal thread

Sources

The spec sheets we read. Every fact above cites one of them.

Source limitations: The currently documented manufacturer product page does not state a model year. The historical year in the stable URL is not a confirmed exact-build year. Left absent: brake_actuation (TRP HDC711C is a cable-actuated hydraulic caliper — neither enum value fits cleanly), rotor interface and brake mounts (not stated), steerer ('FSA No.1/No.10' without the steerer diameter), cockpit clamps ('Kona Road' without sizes), bb_shell (the spec row says only 'Prowheel BB68+').

The shop · Atelier 700