Atelier 700Open the shop

City & commuting · 2017

Liv Flourish 2

We have not verified this bike yet.

8 of the 14 measurements on file · 0 verified. Fit is checked for each part.

Representative silhouette: City step-through. Explore the bike’s regions.
Explore in the workshop

Market: UK

Find this bike

Confirm the year, build and size with the seller.

Explore its parts

On this device. No account needed.

Saving requires JavaScript. Bike details and seller links remain available without JavaScript.

We have not verified this bike yet

8 of the 14 measurements are on file; 0 confirmed by two independent sources.

A documented replacement can be recommended even while unrelated bike measurements are missing.

Find a part

A build of this bike is not yet documented for your market. Its regions and sources remain available below.

Read specifications from other markets

These specifications describe another market. They do not confirm your bike’s build or fitment.

Documented specifications

United States · Liv Flourish 2
These details describe this reference build. They do not automatically apply to another market or build.

The Liv Flourish 2 (2017) is a city bike — representative silhouette: City step-through. We have read 2 specification sheets (Liv Cycling) and recorded 14 fit facts from them. 8 of the 14 measurements a city bike needs to answer fit questions are on file; 0 are confirmed by two independent sources. Where a measurement is missing, we say so below — we do not guess.

Seatpost diameter30.9 mm
Seatpost shapeRound
Wheel size (ISO bead seat)700c / 29" (ISO 622)
Brake mount, frontCantilever / V-brake posts
Brake mount, rearCantilever / V-brake posts
Rotor interface (hubs)No rotor interface (rim brake)
Brake actuationCable rim brake
Brake pad shape (fitted calipers)Rim pads: V-brake / linear-pull threaded stud (M70T4 / S70C, 70 mm)
Freehub bodyShimano HG, 8/9/10-speed body (also 11/12-speed MTB HG cassettes)
Rear speeds8 speeds
Shift actuationMechanical (cable)
Chain standard6 / 7 / 8-speed
Stem bar-clamp diameter (fitted stem)25.4 mm
Handlebar clamp diameter (fitted bar)25.4 mm

Confidence: every fact above comes from a single cited source — "derived" on our lattice; none is verified by a second independent publisher yet. A verdict that rests on a safety-critical fact therefore stops at "unknown" rather than "fits".

Not on file (required for a city bike): Bottom bracket shell · Derailleur hanger · Rear axle spacing · Maximum tyre width (frame) · Front axle spacing · Pedal thread. The sheets we read do not state them; until a source does, confirm these measurements before choosing a part that depends on them.

Why do so many verdicts on this bike read "unknown"?
Because a verdict needs the bike's measurement for every dimension a part requires, and 6 of the 14 required measurements are not on file. "Unknown" means we could not check — not that it fits, and not that it does not.
Will the verdicts change?
Yes. When a second independent source confirms a measurement — or a first one states a missing one — the verdicts are recomputed from the new facts. Nothing on this page is typed by hand.

Regions of this bike

Not on file (required)

  • Bottom bracket shell
  • Derailleur hanger
  • Rear axle spacing
  • Maximum tyre width (frame)
  • Front axle spacing
  • Pedal thread

Sources

The spec sheets we read. Every fact above cites one of them.

Source limitations: Left absent: axle spacings ('Alloy, 32h' only), steerer, bb_shell ('Sealed cartridge, Threaded' — width not stated), pedal thread, max tyre.

The shop · Atelier 700