Open the shop

City & commuting · Gen 4

Trek FX 2

Fit checks still open.

12 factory measurements on file · 4 confirmed by two independent sources. Fit is checked for each part.

Model year not documented

Representative silhouette: Hybrid. Explore the bike’s regions.
Explore in the workshop

Market: UK

Find this bike

  • Local buying options are still being researched. Reference links do not confirm availability.

Confirm the year, build and size with the seller.

Explore its parts

On this device. No account needed.

Saving requires JavaScript. Bike details and seller links remain available without JavaScript.

Fit checks still open

12 factory measurements on file · 4 confirmed by two independent sources. Factory measurements can vary by build, original market and size.

Fit is checked for each part.

See confirmed measurements
  • Rear axle spacing
  • Front axle spacing
  • Rotor interface (hubs)
  • Brake pad shape (fitted calipers)

Find a part

Choose your bike’s documented factory build.

Documented specifications

The Trek FX 2 (Gen 4) is a hybrid bike. Documented measurements and parts apply to their specific build, original market and size. Each configuration’s inventory carries its details and sources.

Rear axle spacingQR, 135 mm
Seatpost diameter27.2 mm
Maximum tyre width (frame)40 mm
Wheel size (ISO bead seat)700c / 29" (ISO 622)
Front axle spacingQR, 100 mm
Brake mount, frontFlat mount
Rotor interface (hubs)6-bolt (ISO)
Maximum rotor, front160 mm
Maximum rotor, rear160 mm
Brake actuationHydraulic disc
Brake pad shape (fitted calipers)Tektro / TRP 2-piston hydraulic & TRP mechanical (E10.11 pad)
Freehub bodyShimano HG, 8/9/10-speed body (also 11/12-speed MTB HG cassettes)
Rear speeds9 speeds
Chain standardShimano LINKGLIDE / CUES 9–11-speed
Stem bar-clamp diameter (fitted stem)31.8 mm
Handlebar clamp diameter (fitted bar)31.8 mm
Rotor interface, rear hub6-bolt (ISO)
Brake actuation, rearHydraulic disc
Brake pad shape, rear caliperTektro / TRP 2-piston hydraulic & TRP mechanical (E10.11 pad)
Chain compatibility familyShimano LINKGLIDE chain family

Confidence: 6 facts are verified by two independent sources; the rest come from a single cited source ("derived").

Fit measurements to check: Bottom bracket shell · Derailleur hanger · Brake mount, rear · Pedal thread. The sheets we read do not state them; until a source does, confirm these measurements before choosing a part that depends on them.

Why do so many verdicts on this bike read "unknown"?
Because a verdict needs the bike's measurement for every dimension a part requires, and 4 of the 16 required measurements are not on file. "Unknown" means we could not check — not that it fits, and not that it does not.
Will the verdicts change?
Yes. When a second independent source confirms a measurement — or a first one states a missing one — the verdicts are recomputed from the new facts. Nothing on this page is typed by hand.

Regions of this bike

Fit measurements to check

  • Bottom bracket shell
  • Derailleur hanger
  • Brake mount, rear
  • Pedal thread

Sources

The spec sheets we read. Every fact above cites one of them.

Source limitations: The Canadian inventory does not identify the installed chain or grips. The exact Prowheel PRO-MD171P-40T-170 crank (W5301955) is now identified for XS–XL; Trek pairs this same crank and rear group with LG500 on a separately identified Equipped build, supporting LINKGLIDE chain-family replacement. Select a sufficient chain package and size it to the actual bicycle using Shimano instructions. Frame text says post-mount while the rear brake service row says flat-mount: inspect the rear interface. Headset arrangement, BB thread/spindle standard and length, and replacement crank hardware remain unconfirmed. A worn original 40T ring has a documented complete-crankset service route W5301955 / PRO-MD171P-40T-170; a standalone replacement ring and generic crank fit are not established. Trek and its matching authorized Canadian dealer reference the same UPC601842892503.

The shop · Atelier 700