Open the shop

Surly · FK1479

Surly Disc Trucker thru-axle fork 700c, black, FK1479

Surly fork. Needs from your bike: Wheel size (ISO bead seat), Steerer tube, Front axle spacing, Brake mount, front, Fitted front tyre width, Approved replacement fork axle-to-crown length, Approved replacement fork offset, Minimum required fork steerer length, Approved replacement fork assembly interface and Fitted front rotor diameter.

Start with your bike

Will this part fit my bike?

Choose a bike to check its fit. Without one, you are browsing product references.

My bike is missing

Find this part

Affiliate links. Atelier 700 earns a commission on purchases made through these links. As an Amazon Associate, we earn from qualifying purchases.

Choose the right variant and check the fit for your bike.

See the precise identity, documented pieces and what still needs confirmation.

The Surly Disc Trucker thru-axle fork 700c, black, FK1479 is a fork (component). It requires 10 things of a bike — Wheel size (ISO bead seat), Steerer tube, Front axle spacing, Brake mount, front, Fitted front tyre width, Approved replacement fork axle-to-crown length, Approved replacement fork offset, Minimum required fork steerer length, Approved replacement fork assembly interface and Fitted front rotor diameter — read from Surly. On every bike page its verdict is computed from those requirements against the bike's cited facts: when a fact is missing the answer is "unknown", never a guess.

Requires — Wheel size (ISO bead seat)700c / 29" (ISO 622)
Requires — Steerer tube1-1/8" straight threadless
Requires — Front axle spacingThru-axle, 100 × 12 mm
Requires — Brake mount, frontRear-standard flat mount on a fork (Surly Disc Trucker)
Requires — Fitted front tyre width≤ 47 mm
Requires — Approved replacement fork axle-to-crown length390 mm
Requires — Approved replacement fork offset45 mm
Requires — Minimum required fork steerer length≤ 350 mm
Requires — Approved replacement fork assembly interfaceSurly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset
Requires — Fitted front rotor diameter140 mm

Mounting requirements to check: Steerer tube, Front axle spacing, Brake mount, front, Fitted front tyre width, Approved replacement fork axle-to-crown length, Approved replacement fork offset, Minimum required fork steerer length, Approved replacement fork assembly interface and Fitted front rotor diameter. Compatibility requires bike measurements confirmed by two independent sources. Otherwise, the verdict shows "Fit checks required" with the specific checks to complete.

Does this part fit my bike?
Find your bike under "Fit, bike by bike" below, or open your bike's "Fork" region page. The verdict there is computed from this part's requirements against the bike's cited facts — with its confidence and sources.
What does "does not fit" mean here?
That a fact on file for the bike contradicts a requirement of this part — a confident no, with both values shown.

Standards

  • 700c / 29" (ISO 622)
  • 1-1/8" straight threadless
  • Thru-axle, 100 × 12 mm
  • Rear-standard flat mount on a fork (Surly Disc Trucker)
  • ≤ 47 mm
  • 390 mm
  • 45 mm
  • ≤ 350 mm
  • Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset
  • 140 mm

Needs from your bike: Wheel size (ISO bead seat): 700c / 29" (ISO 622) · Steerer tube: 1-1/8" straight threadless · Front axle spacing: Thru-axle, 100 × 12 mm · Brake mount, front: Rear-standard flat mount on a fork (Surly Disc Trucker) · Fitted front tyre width: ≤ 47 mm · Approved replacement fork axle-to-crown length: 390 mm · Approved replacement fork offset: 45 mm · Minimum required fork steerer length: ≤ 350 mm · Approved replacement fork assembly interface: Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset · Fitted front rotor diameter: 140 mm

Fork

Fit, bike by bike

0 fit · 32 unknown

Brompton C Line 12-speedFit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Canyon Grail CF SL 7Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Canyon Ultimate CF 7Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike 1-1/4" straight (single-source) · part 1-1/8" straight threadless — mismatch
  • Front axle spacing (safety-critical): bike Thru-axle, 100 × 12 mm (single-source) · part Thru-axle, 100 × 12 mm — match
  • Brake mount, front (safety-critical): bike Flat mount (single-source) · part Rear-standard flat mount on a fork (Surly Disc Trucker) — mismatch
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant Defy Advanced 2 (2025)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant Defy Advanced 2 (2026)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant Escape 3 (2024)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant Fathom 29 2 (2022)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant Glory Advanced (2025)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike 650b / 27.5" (ISO 584) (verified) · part 700c / 29" (ISO 622) — mismatch
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike Thru-axle, 110 × 20 mm (Boost / DH) (verified) · part Thru-axle, 100 × 12 mm — mismatch
  • Brake mount, front (safety-critical): bike Post mount (74 mm) (verified) · part Rear-standard flat mount on a fork (Surly Disc Trucker) — mismatch
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant Propel Advanced 2 (2027)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant Reign 29 2 (2021)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant Revolt 2 (2026)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant Revolt Advanced 2 (2025)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant Roam 2 Disc (2021)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant Talon 1 (2027)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant Talon 2 (2025)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant Talon E+ (2026)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant TCX Advanced Pro 2 (2023)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant Trance X 29 2 (2022)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant XTC Jr 24 (2015)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Kona Process 134Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
See all 32 bikes
Kona SutraFit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Liv Flourish 2 (2017)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Specialized Diverge E5 Shimano Claris (2025)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Specialized Rockhopper Sport CUESFit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
State Bicycle Co. Core-Line WulfFit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike 700c / 29" (ISO 622) (verified) · part 700c / 29" (ISO 622) — match
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike Bolt-on / nutted, 100 mm (single-source) · part Thru-axle, 100 × 12 mm — mismatch
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Surly Disc Trucker 700cFit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Tern GSD S10 Gen 3Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Tern Quick Haul D8 Gen 1Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike 20" / BMX (ISO 406) (verified) · part 700c / 29" (ISO 622) — mismatch
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Trek Domane AL 2 Gen 4Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Trek FX 2 (Gen 4)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Trek Marlin 5 Gen 3Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
woom GO 4Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike 20" / BMX (ISO 406) (verified) · part 700c / 29" (ISO 622) — mismatch
  • Steerer tube (safety-critical): bike 1" threadless (single-source) · part 1-1/8" straight threadless — mismatch
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike Cantilever / V-brake posts (verified) · part Rear-standard flat mount on a fork (Surly Disc Trucker) — mismatch
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file

Sources

The spec sheets we read. Every fact above cites one of them.

The shop · Atelier 700