Atelier 700Open the shop

Fizik Tempo Argo R5 saddle, 150 mm, black, 7×7 mm S-alloy rails

Fizik saddle. Needs from your bike: Supported saddle rail section and Saddle rail/clamp interface.

Your configuration

Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
  • Supported saddle rail section : Round 7 × 7 mm railsCheck your installed setup or its technical sheet.
  • Saddle rail/clamp interface : Conventional two-rail saddle clampCheck your installed setup or its technical sheet.
Why? The facts we compared (2 dimensions compared)
  • Supported saddle rail section (safety-critical): bike nothing on file · part Round 7 × 7 mm rails — not on file
  • Saddle rail/clamp interface (safety-critical): bike nothing on file · part Conventional two-rail saddle clamp — not on file

Sources:

Check configuration and return to bike

The interfaces involved in this repair still need verification before buying.

The Fizik Tempo Argo R5 saddle, 150 mm, black, 7×7 mm S-alloy rails is a saddle (component). It requires 2 things of a bike — Supported saddle rail section and Saddle rail/clamp interface — read from Fizik. On every bike page its verdict is computed from those requirements against the bike's cited facts: when a fact is missing the answer is "unknown", never a guess.

Requires — Supported saddle rail sectionRound 7 × 7 mm rails
Requires — Saddle rail/clamp interfaceConventional two-rail saddle clamp

Mounting requirements to check: Supported saddle rail section and Saddle rail/clamp interface. Compatibility requires bike measurements confirmed by two independent sources. Otherwise, the verdict shows "Fit checks required" with the specific checks to complete.

Does this part fit my bike?
Find your bike under "Fits these bikes" below, or open your bike's "Saddle" region page. The verdict there is computed from this part's requirements against the bike's cited facts — with its confidence and sources.
What does "does not fit" mean here?
That a fact on file for the bike contradicts a requirement of this part — a confident no, with both values shown.

Standards

  • Round 7 × 7 mm rails
  • Conventional two-rail saddle clamp

Needs from your bike: Supported saddle rail section: Round 7 × 7 mm rails · Saddle rail/clamp interface: Conventional two-rail saddle clamp

Saddle

Fits these bikes

Canyon Grail CF SL 7Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
  • Supported saddle rail section : Round 7 × 7 mm railsCheck your installed setup or its technical sheet.
  • Saddle rail/clamp interface : Conventional two-rail saddle clampCheck your installed setup or its technical sheet.
Why? The facts we compared (2 dimensions compared)
  • Supported saddle rail section (safety-critical): bike nothing on file · part Round 7 × 7 mm rails — not on file
  • Saddle rail/clamp interface (safety-critical): bike nothing on file · part Conventional two-rail saddle clamp — not on file

Sources:

Canyon Ultimate CF 7 (5th generation · US build 4612)Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
  • Supported saddle rail section : Round 7 × 7 mm railsCheck your installed setup or its technical sheet.
  • Saddle rail/clamp interface : Conventional two-rail saddle clampCheck your installed setup or its technical sheet.
Why? The facts we compared (2 dimensions compared)
  • Supported saddle rail section (safety-critical): bike nothing on file · part Round 7 × 7 mm rails — not on file
  • Saddle rail/clamp interface (safety-critical): bike nothing on file · part Conventional two-rail saddle clamp — not on file

Sources:

Giant Defy Advanced 2 (2025)Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
  • Supported saddle rail section : Round 7 × 7 mm railsCheck your installed setup or its technical sheet.
  • Saddle rail/clamp interface : Conventional two-rail saddle clampCheck your installed setup or its technical sheet.
Why? The facts we compared (2 dimensions compared)
  • Supported saddle rail section (safety-critical): bike nothing on file · part Round 7 × 7 mm rails — not on file
  • Saddle rail/clamp interface (safety-critical): bike nothing on file · part Conventional two-rail saddle clamp — not on file

Sources:

Giant Escape 3 (2024)Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
  • Supported saddle rail section : Round 7 × 7 mm railsCheck your installed setup or its technical sheet.
  • Saddle rail/clamp interface : Conventional two-rail saddle clampCheck your installed setup or its technical sheet.
Why? The facts we compared (2 dimensions compared)
  • Supported saddle rail section (safety-critical): bike nothing on file · part Round 7 × 7 mm rails — not on file
  • Saddle rail/clamp interface (safety-critical): bike nothing on file · part Conventional two-rail saddle clamp — not on file

Sources:

Giant Fathom 29 2 (2022)Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
  • Supported saddle rail section : Round 7 × 7 mm railsCheck your installed setup or its technical sheet.
  • Saddle rail/clamp interface : Conventional two-rail saddle clampCheck your installed setup or its technical sheet.
Why? The facts we compared (2 dimensions compared)
  • Supported saddle rail section (safety-critical): bike nothing on file · part Round 7 × 7 mm rails — not on file
  • Saddle rail/clamp interface (safety-critical): bike nothing on file · part Conventional two-rail saddle clamp — not on file

Sources:

Giant Glory Advanced (2025)Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
  • Supported saddle rail section : Round 7 × 7 mm railsCheck your installed setup or its technical sheet.
  • Saddle rail/clamp interface : Conventional two-rail saddle clampCheck your installed setup or its technical sheet.
Why? The facts we compared (2 dimensions compared)
  • Supported saddle rail section (safety-critical): bike nothing on file · part Round 7 × 7 mm rails — not on file
  • Saddle rail/clamp interface (safety-critical): bike nothing on file · part Conventional two-rail saddle clamp — not on file

Sources:

Giant Propel Advanced 2 (2027)Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
  • Supported saddle rail section : Round 7 × 7 mm railsCheck your installed setup or its technical sheet.
  • Saddle rail/clamp interface : Conventional two-rail saddle clampCheck your installed setup or its technical sheet.
Why? The facts we compared (2 dimensions compared)
  • Supported saddle rail section (safety-critical): bike nothing on file · part Round 7 × 7 mm rails — not on file
  • Saddle rail/clamp interface (safety-critical): bike nothing on file · part Conventional two-rail saddle clamp — not on file

Sources:

Giant Reign 29 2 (2021)Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
  • Supported saddle rail section : Round 7 × 7 mm railsCheck your installed setup or its technical sheet.
  • Saddle rail/clamp interface : Conventional two-rail saddle clampCheck your installed setup or its technical sheet.
Why? The facts we compared (2 dimensions compared)
  • Supported saddle rail section (safety-critical): bike nothing on file · part Round 7 × 7 mm rails — not on file
  • Saddle rail/clamp interface (safety-critical): bike nothing on file · part Conventional two-rail saddle clamp — not on file

Sources:

Giant Revolt Advanced 2 (2025)Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
  • Supported saddle rail section : Round 7 × 7 mm railsCheck your installed setup or its technical sheet.
  • Saddle rail/clamp interface : Conventional two-rail saddle clampCheck your installed setup or its technical sheet.
Why? The facts we compared (2 dimensions compared)
  • Supported saddle rail section (safety-critical): bike nothing on file · part Round 7 × 7 mm rails — not on file
  • Saddle rail/clamp interface (safety-critical): bike nothing on file · part Conventional two-rail saddle clamp — not on file

Sources:

Giant Roam 2 Disc (2021)Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
  • Supported saddle rail section : Round 7 × 7 mm railsCheck your installed setup or its technical sheet.
  • Saddle rail/clamp interface : Conventional two-rail saddle clampCheck your installed setup or its technical sheet.
Why? The facts we compared (2 dimensions compared)
  • Supported saddle rail section (safety-critical): bike nothing on file · part Round 7 × 7 mm rails — not on file
  • Saddle rail/clamp interface (safety-critical): bike nothing on file · part Conventional two-rail saddle clamp — not on file

Sources:

Giant Talon 2 (2025)Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
  • Supported saddle rail section : Round 7 × 7 mm railsCheck your installed setup or its technical sheet.
  • Saddle rail/clamp interface : Conventional two-rail saddle clampCheck your installed setup or its technical sheet.
Why? The facts we compared (2 dimensions compared)
  • Supported saddle rail section (safety-critical): bike nothing on file · part Round 7 × 7 mm rails — not on file
  • Saddle rail/clamp interface (safety-critical): bike nothing on file · part Conventional two-rail saddle clamp — not on file

Sources:

Giant Talon E+ (2026)Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
  • Supported saddle rail section : Round 7 × 7 mm railsCheck your installed setup or its technical sheet.
  • Saddle rail/clamp interface : Conventional two-rail saddle clampCheck your installed setup or its technical sheet.
Why? The facts we compared (2 dimensions compared)
  • Supported saddle rail section (safety-critical): bike nothing on file · part Round 7 × 7 mm rails — not on file
  • Saddle rail/clamp interface (safety-critical): bike nothing on file · part Conventional two-rail saddle clamp — not on file

Sources:

Giant TCX Advanced Pro 2 (2023)Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
  • Supported saddle rail section : Round 7 × 7 mm railsCheck your installed setup or its technical sheet.
  • Saddle rail/clamp interface : Conventional two-rail saddle clampCheck your installed setup or its technical sheet.
Why? The facts we compared (2 dimensions compared)
  • Supported saddle rail section (safety-critical): bike nothing on file · part Round 7 × 7 mm rails — not on file
  • Saddle rail/clamp interface (safety-critical): bike nothing on file · part Conventional two-rail saddle clamp — not on file

Sources:

Giant Trance X 29 2 (2022)Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
  • Supported saddle rail section : Round 7 × 7 mm railsCheck your installed setup or its technical sheet.
  • Saddle rail/clamp interface : Conventional two-rail saddle clampCheck your installed setup or its technical sheet.
Why? The facts we compared (2 dimensions compared)
  • Supported saddle rail section (safety-critical): bike nothing on file · part Round 7 × 7 mm rails — not on file
  • Saddle rail/clamp interface (safety-critical): bike nothing on file · part Conventional two-rail saddle clamp — not on file

Sources:

Giant XTC Jr 24 (2015)Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
  • Supported saddle rail section : Round 7 × 7 mm railsCheck your installed setup or its technical sheet.
  • Saddle rail/clamp interface : Conventional two-rail saddle clampCheck your installed setup or its technical sheet.
Why? The facts we compared (2 dimensions compared)
  • Supported saddle rail section (safety-critical): bike nothing on file · part Round 7 × 7 mm rails — not on file
  • Saddle rail/clamp interface (safety-critical): bike nothing on file · part Conventional two-rail saddle clamp — not on file

Sources:

Kona SutraFit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
  • Supported saddle rail section : Round 7 × 7 mm railsCheck your installed setup or its technical sheet.
  • Saddle rail/clamp interface : Conventional two-rail saddle clampCheck your installed setup or its technical sheet.
Why? The facts we compared (2 dimensions compared)
  • Supported saddle rail section (safety-critical): bike nothing on file · part Round 7 × 7 mm rails — not on file
  • Saddle rail/clamp interface (safety-critical): bike nothing on file · part Conventional two-rail saddle clamp — not on file

Sources:

Liv Flourish 2 (2017)Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
  • Supported saddle rail section : Round 7 × 7 mm railsCheck your installed setup or its technical sheet.
  • Saddle rail/clamp interface : Conventional two-rail saddle clampCheck your installed setup or its technical sheet.
Why? The facts we compared (2 dimensions compared)
  • Supported saddle rail section (safety-critical): bike nothing on file · part Round 7 × 7 mm rails — not on file
  • Saddle rail/clamp interface (safety-critical): bike nothing on file · part Conventional two-rail saddle clamp — not on file

Sources:

State Bicycle Co. Core-Line WulfFit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
  • Supported saddle rail section : Round 7 × 7 mm railsCheck your installed setup or its technical sheet.
  • Saddle rail/clamp interface : Conventional two-rail saddle clampCheck your installed setup or its technical sheet.
Why? The facts we compared (2 dimensions compared)
  • Supported saddle rail section (safety-critical): bike nothing on file · part Round 7 × 7 mm rails — not on file
  • Saddle rail/clamp interface (safety-critical): bike nothing on file · part Conventional two-rail saddle clamp — not on file

Sources:

Tern Quick Haul D8 Gen 1Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
  • Supported saddle rail section : Round 7 × 7 mm railsCheck your installed setup or its technical sheet.
  • Saddle rail/clamp interface : Conventional two-rail saddle clampCheck your installed setup or its technical sheet.
Why? The facts we compared (2 dimensions compared)
  • Supported saddle rail section (safety-critical): bike nothing on file · part Round 7 × 7 mm rails — not on file
  • Saddle rail/clamp interface (safety-critical): bike nothing on file · part Conventional two-rail saddle clamp — not on file

Sources:

woom GO 4Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
  • Supported saddle rail section : Round 7 × 7 mm railsCheck your installed setup or its technical sheet.
  • Saddle rail/clamp interface : Conventional two-rail saddle clampCheck your installed setup or its technical sheet.
Why? The facts we compared (2 dimensions compared)
  • Supported saddle rail section (safety-critical): bike nothing on file · part Round 7 × 7 mm rails — not on file
  • Saddle rail/clamp interface (safety-critical): bike nothing on file · part Conventional two-rail saddle clamp — not on file

Sources:

See all 21 bikes

Sources

The spec sheets we read. Every fact above cites one of them.

The shop · Atelier 700