Does this part fit my bike?

Find your bike under "Fits these bikes" below, or open your bike's "Front wheel" region page. The verdict there is computed from this part's requirements against the bike's cited facts — with its confidence and sources.

What does "does not fit" mean here?

That a fact on file for the bike contradicts a requirement of this part — a confident no, with both values shown.

DT Swiss P 1800 SPLINE db 23 front wheel, 12×100 mm

Name: DT Swiss P 1800 SPLINE db 23 front wheel, 12×100 mm
Brand: DT Swiss

DT Swiss front wheel. Needs from your bike: Wheel size (ISO bead seat), Front axle spacing, Rotor interface (hubs), Required riding-use category (ASTM), Electric assist system, Total operating mass (rider, bike and luggage) and Fitted front tyre width. Provides: Rotor interface (hubs).

Your configuration

Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.

Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet.
Front axle spacing : Thru-axle, 100 × 12 mmCheck your installed setup or its technical sheet.
Rotor interface (hubs) : Center LockCheck your installed setup or its technical sheet.
Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet.
Electric assist system : No electric assistCheck your installed setup or its technical sheet.
Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet.
Fitted front tyre width : 23–56 mmCheck your installed setup or its technical sheet.

Why? The facts we compared (7 dimensions compared)

Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
Rotor interface (hubs) (safety-critical): bike nothing on file · part Center Lock — not on file
Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file
Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file
Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file
Fitted front tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file

Sources:

DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28)
DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)

Check configuration and return to bike

The interfaces involved in this repair still need verification before buying.

See the precise identity, documented pieces and what still needs confirmation.

DT Swiss P 1800 SPLINE db 23 front, 12×100, W0P1800AIDXSA21344

The DT Swiss P 1800 SPLINE db 23 front wheel, 12×100 mm is a front wheel (component). It requires 7 things of a bike — Wheel size (ISO bead seat), Front axle spacing, Rotor interface (hubs), Required riding-use category (ASTM), Electric assist system, Total operating mass (rider, bike and luggage) and Fitted front tyre width — read from DT Swiss. It provides Rotor interface (hubs) to the parts that mount on it. On every bike page its verdict is computed from those requirements against the bike's cited facts: when a fact is missing the answer is "unknown", never a guess.

Requires — Wheel size (ISO bead seat)	700c / 29" (ISO 622)
Requires — Front axle spacing	Thru-axle, 100 × 12 mm
Requires — Rotor interface (hubs)	Center Lock
Requires — Required riding-use category (ASTM)	1 category
Requires — Electric assist system	No electric assist
Requires — Total operating mass (rider, bike and luggage)	≤ 120 kg
Requires — Fitted front tyre width	23–56 mm
Provides — Rotor interface (hubs)	Center Lock

Mounting requirements to check: Front axle spacing, Rotor interface (hubs), Required riding-use category (ASTM), Electric assist system, Total operating mass (rider, bike and luggage) and Fitted front tyre width. Compatibility requires bike measurements confirmed by two independent sources. Otherwise, the verdict shows "Fit checks required" with the specific checks to complete.

Does this part fit my bike?: Find your bike under "Fits these bikes" below, or open your bike's "Front wheel" region page. The verdict there is computed from this part's requirements against the bike's cited facts — with its confidence and sources.
What does "does not fit" mean here?: That a fact on file for the bike contradicts a requirement of this part — a confident no, with both values shown.

Standards

700c / 29" (ISO 622)
Thru-axle, 100 × 12 mm
Center Lock
1 category
No electric assist
≤ 120 kg
23–56 mm

Needs from your bike: Wheel size (ISO bead seat): 700c / 29" (ISO 622) · Front axle spacing: Thru-axle, 100 × 12 mm · Rotor interface (hubs): Center Lock · Required riding-use category (ASTM): 1 category · Electric assist system: No electric assist · Total operating mass (rider, bike and luggage): ≤ 120 kg · Fitted front tyre width: 23–56 mm

Provides: Rotor interface (hubs): Center Lock

Front wheel

Fits these bikes

Canyon Grail CF SL 7	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Front axle spacing : Thru-axle, 100 × 12 mmCheck your installed setup or its technical sheet. Rotor interface (hubs) : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted front tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (7 dimensions compared) Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file Rotor interface (hubs) (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted front tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Canyon Ultimate CF 7 (5th generation · US build 4612)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Front axle spacing : Thru-axle, 100 × 12 mmMatch requires corroboration from an independent technical source. Rotor interface (hubs) : Center LockMatch requires corroboration from an independent technical source. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted front tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (7 dimensions compared) Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Front axle spacing (safety-critical): bike Thru-axle, 100 × 12 mm (single-source) · part Thru-axle, 100 × 12 mm — match Rotor interface (hubs) (safety-critical): bike Center Lock (single-source) · part Center Lock — match Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted front tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) Canyon — Ultimate CF 7 — specifications (tier 1) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Giant Defy Advanced 2 (2025)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Front axle spacing : Thru-axle, 100 × 12 mmCheck your installed setup or its technical sheet. Rotor interface (hubs) : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted front tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (7 dimensions compared) Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file Rotor interface (hubs) (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted front tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Giant Escape 3 (2024)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Front axle spacing : Thru-axle, 100 × 12 mmCheck your installed setup or its technical sheet. Rotor interface (hubs) : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted front tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (7 dimensions compared) Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file Rotor interface (hubs) (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted front tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Giant Fathom 29 2 (2022)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Front axle spacing : Thru-axle, 100 × 12 mmCheck your installed setup or its technical sheet. Rotor interface (hubs) : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted front tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (7 dimensions compared) Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file Rotor interface (hubs) (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted front tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Giant Glory Advanced (2025)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Front axle spacing : Thru-axle, 100 × 12 mmCheck your installed setup or its technical sheet. Rotor interface (hubs) : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted front tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (7 dimensions compared) Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file Rotor interface (hubs) (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted front tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Giant Propel Advanced 2 (2027)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Front axle spacing : Thru-axle, 100 × 12 mmCheck your installed setup or its technical sheet. Rotor interface (hubs) : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted front tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (7 dimensions compared) Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file Rotor interface (hubs) (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted front tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Giant Reign 29 2 (2021)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Front axle spacing : Thru-axle, 100 × 12 mmCheck your installed setup or its technical sheet. Rotor interface (hubs) : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted front tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (7 dimensions compared) Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file Rotor interface (hubs) (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted front tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Giant Revolt Advanced 2 (2025)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Front axle spacing : Thru-axle, 100 × 12 mmCheck your installed setup or its technical sheet. Rotor interface (hubs) : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted front tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (7 dimensions compared) Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file Rotor interface (hubs) (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted front tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Giant Roam 2 Disc (2021)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Front axle spacing : Thru-axle, 100 × 12 mmCheck your installed setup or its technical sheet. Rotor interface (hubs) : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted front tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (7 dimensions compared) Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file Rotor interface (hubs) (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted front tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Giant Talon E+ (2026)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Front axle spacing : Thru-axle, 100 × 12 mmCheck your installed setup or its technical sheet. Rotor interface (hubs) : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted front tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (7 dimensions compared) Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file Rotor interface (hubs) (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted front tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Giant TCX Advanced Pro 2 (2023)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Front axle spacing : Thru-axle, 100 × 12 mmCheck your installed setup or its technical sheet. Rotor interface (hubs) : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted front tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (7 dimensions compared) Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file Rotor interface (hubs) (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted front tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Giant Trance X 29 2 (2022)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Front axle spacing : Thru-axle, 100 × 12 mmCheck your installed setup or its technical sheet. Rotor interface (hubs) : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted front tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (7 dimensions compared) Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file Rotor interface (hubs) (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted front tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Giant XTC Jr 24 (2015)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Front axle spacing : Thru-axle, 100 × 12 mmCheck your installed setup or its technical sheet. Rotor interface (hubs) : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted front tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (7 dimensions compared) Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file Rotor interface (hubs) (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted front tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Kona Sutra	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Front axle spacing : Thru-axle, 100 × 12 mmCheck your installed setup or its technical sheet. Rotor interface (hubs) : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted front tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (7 dimensions compared) Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file Rotor interface (hubs) (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted front tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Liv Flourish 2 (2017)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Front axle spacing : Thru-axle, 100 × 12 mmCheck your installed setup or its technical sheet. Rotor interface (hubs) : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted front tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (7 dimensions compared) Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file Rotor interface (hubs) (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted front tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
State Bicycle Co. Core-Line Wulf	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Front axle spacing : Thru-axle, 100 × 12 mmCheck your installed setup or its technical sheet. Rotor interface (hubs) : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted front tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (7 dimensions compared) Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file Rotor interface (hubs) (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted front tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Surly Disc Trucker 700c (2nd generation (2020 platform))	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Front axle spacing : Thru-axle, 100 × 12 mmCheck your installed setup or its technical sheet. Rotor interface (hubs) : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted front tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (7 dimensions compared) Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file Rotor interface (hubs) (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted front tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Tern Quick Haul D8 Gen 1	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Front axle spacing : Thru-axle, 100 × 12 mmCheck your installed setup or its technical sheet. Rotor interface (hubs) : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted front tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (7 dimensions compared) Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file Rotor interface (hubs) (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted front tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
woom GO 4	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Front axle spacing : Thru-axle, 100 × 12 mmCheck your installed setup or its technical sheet. Rotor interface (hubs) : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted front tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (7 dimensions compared) Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file Rotor interface (hubs) (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted front tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)

See all 21 bikes

Sources

The spec sheets we read. Every fact above cites one of them.

DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28)
DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)