Does this part fit my bike?

Find your bike under "Fits these bikes" below, or open your bike's "Rear wheel" region page. The verdict there is computed from this part's requirements against the bike's cited facts — with its confidence and sources.

What does "does not fit" mean here?

That a fact on file for the bike contradicts a requirement of this part — a confident no, with both values shown.

DT Swiss P 1800 SPLINE db 23 rear wheel, 12×142 mm, Shimano HG11

Name: DT Swiss P 1800 SPLINE db 23 rear wheel, 12×142 mm, Shimano HG11
Brand: DT Swiss

DT Swiss rear wheel. Needs from your bike: Rear axle spacing, Wheel size (ISO bead seat), Freehub body, Rotor interface, rear hub, Required riding-use category (ASTM), Electric assist system, Total operating mass (rider, bike and luggage) and Fitted rear tyre width. Provides: Rotor interface, rear hub and Freehub body.

Find this part

Choose the right variant and check the fit for your bike.

See the precise identity, documented pieces and what still needs confirmation.

DT Swiss P 1800 SPLINE db 23 Shimano rear, 12×142, W0P1800NIDMSA21345

The DT Swiss P 1800 SPLINE db 23 rear wheel, 12×142 mm, Shimano HG11 is a rear wheel (component). It requires 8 things of a bike — Rear axle spacing, Wheel size (ISO bead seat), Freehub body, Rotor interface, rear hub, Required riding-use category (ASTM), Electric assist system, Total operating mass (rider, bike and luggage) and Fitted rear tyre width — read from DT Swiss. It provides Freehub body and Rotor interface, rear hub to the parts that mount on it. On every bike page its verdict is computed from those requirements against the bike's cited facts: when a fact is missing the answer is "unknown", never a guess.

Requires — Rear axle spacing	Thru-axle, 142 × 12 mm
Requires — Wheel size (ISO bead seat)	700c / 29" (ISO 622)
Requires — Freehub body	Shimano HG, 11-speed road body (+1.85 mm)
Requires — Rotor interface, rear hub	Center Lock
Requires — Required riding-use category (ASTM)	1 category
Requires — Electric assist system	No electric assist
Requires — Total operating mass (rider, bike and luggage)	≤ 120 kg
Requires — Fitted rear tyre width	23–56 mm
Provides — Freehub body	Shimano HG, 11-speed road body (+1.85 mm)
Provides — Rotor interface, rear hub	Center Lock

Mounting requirements to check: Rear axle spacing, Rotor interface, rear hub, Required riding-use category (ASTM), Electric assist system, Total operating mass (rider, bike and luggage) and Fitted rear tyre width. Compatibility requires bike measurements confirmed by two independent sources. Otherwise, the verdict shows "Fit checks required" with the specific checks to complete.

Does this part fit my bike?: Find your bike under "Fits these bikes" below, or open your bike's "Rear wheel" region page. The verdict there is computed from this part's requirements against the bike's cited facts — with its confidence and sources.
What does "does not fit" mean here?: That a fact on file for the bike contradicts a requirement of this part — a confident no, with both values shown.

Standards

Thru-axle, 142 × 12 mm
700c / 29" (ISO 622)
Shimano HG, 11-speed road body (+1.85 mm)
Center Lock
1 category
No electric assist
≤ 120 kg
23–56 mm

Needs from your bike: Rear axle spacing: Thru-axle, 142 × 12 mm · Wheel size (ISO bead seat): 700c / 29" (ISO 622) · Freehub body: Shimano HG, 11-speed road body (+1.85 mm) · Rotor interface, rear hub: Center Lock · Required riding-use category (ASTM): 1 category · Electric assist system: No electric assist · Total operating mass (rider, bike and luggage): ≤ 120 kg · Fitted rear tyre width: 23–56 mm

Provides: Freehub body: Shimano HG, 11-speed road body (+1.85 mm) · Rotor interface, rear hub: Center Lock

Rear wheel

Fits these bikes

Canyon Grail CF SL 7	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Rear axle spacing : Thru-axle, 142 × 12 mmCheck your installed setup or its technical sheet. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Freehub body : Shimano HG, 11-speed road body (+1.85 mm)Check your installed setup or its technical sheet. Rotor interface, rear hub : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted rear tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (8 dimensions compared) Rear axle spacing (safety-critical): bike nothing on file · part Thru-axle, 142 × 12 mm — not on file Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Freehub body: bike nothing on file · part Shimano HG, 11-speed road body (+1.85 mm) — not on file Rotor interface, rear hub (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted rear tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Canyon Ultimate CF 7 (5th generation · US build 4612)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Rear axle spacing : Thru-axle, 142 × 12 mmMatch requires corroboration from an independent technical source. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Rotor interface, rear hub : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted rear tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (8 dimensions compared) Rear axle spacing (safety-critical): bike Thru-axle, 142 × 12 mm (single-source) · part Thru-axle, 142 × 12 mm — match Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Freehub body: bike Shimano HG, 11-speed road body (+1.85 mm) (single-source) · part Shimano HG, 11-speed road body (+1.85 mm) — match Rotor interface, rear hub (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted rear tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: Canyon — Ultimate CF 7 — specifications (tier 1) DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Giant Defy Advanced 2 (2025)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Rear axle spacing : Thru-axle, 142 × 12 mmCheck your installed setup or its technical sheet. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Freehub body : Shimano HG, 11-speed road body (+1.85 mm)Check your installed setup or its technical sheet. Rotor interface, rear hub : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted rear tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (8 dimensions compared) Rear axle spacing (safety-critical): bike nothing on file · part Thru-axle, 142 × 12 mm — not on file Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Freehub body: bike nothing on file · part Shimano HG, 11-speed road body (+1.85 mm) — not on file Rotor interface, rear hub (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted rear tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Giant Escape 3 (2024)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Rear axle spacing : Thru-axle, 142 × 12 mmCheck your installed setup or its technical sheet. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Freehub body : Shimano HG, 11-speed road body (+1.85 mm)Check your installed setup or its technical sheet. Rotor interface, rear hub : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted rear tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (8 dimensions compared) Rear axle spacing (safety-critical): bike nothing on file · part Thru-axle, 142 × 12 mm — not on file Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Freehub body: bike nothing on file · part Shimano HG, 11-speed road body (+1.85 mm) — not on file Rotor interface, rear hub (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted rear tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Giant Fathom 29 2 (2022)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Rear axle spacing : Thru-axle, 142 × 12 mmCheck your installed setup or its technical sheet. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Freehub body : Shimano HG, 11-speed road body (+1.85 mm)Check your installed setup or its technical sheet. Rotor interface, rear hub : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted rear tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (8 dimensions compared) Rear axle spacing (safety-critical): bike nothing on file · part Thru-axle, 142 × 12 mm — not on file Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Freehub body: bike nothing on file · part Shimano HG, 11-speed road body (+1.85 mm) — not on file Rotor interface, rear hub (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted rear tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Giant Glory Advanced (2025)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Rear axle spacing : Thru-axle, 142 × 12 mmCheck your installed setup or its technical sheet. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Freehub body : Shimano HG, 11-speed road body (+1.85 mm)Check your installed setup or its technical sheet. Rotor interface, rear hub : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted rear tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (8 dimensions compared) Rear axle spacing (safety-critical): bike nothing on file · part Thru-axle, 142 × 12 mm — not on file Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Freehub body: bike nothing on file · part Shimano HG, 11-speed road body (+1.85 mm) — not on file Rotor interface, rear hub (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted rear tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Giant Propel Advanced 2 (2027)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Rear axle spacing : Thru-axle, 142 × 12 mmCheck your installed setup or its technical sheet. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Freehub body : Shimano HG, 11-speed road body (+1.85 mm)Check your installed setup or its technical sheet. Rotor interface, rear hub : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted rear tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (8 dimensions compared) Rear axle spacing (safety-critical): bike nothing on file · part Thru-axle, 142 × 12 mm — not on file Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Freehub body: bike nothing on file · part Shimano HG, 11-speed road body (+1.85 mm) — not on file Rotor interface, rear hub (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted rear tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Giant Reign 29 2 (2021)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Rear axle spacing : Thru-axle, 142 × 12 mmCheck your installed setup or its technical sheet. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Freehub body : Shimano HG, 11-speed road body (+1.85 mm)Check your installed setup or its technical sheet. Rotor interface, rear hub : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted rear tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (8 dimensions compared) Rear axle spacing (safety-critical): bike nothing on file · part Thru-axle, 142 × 12 mm — not on file Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Freehub body: bike nothing on file · part Shimano HG, 11-speed road body (+1.85 mm) — not on file Rotor interface, rear hub (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted rear tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Giant Revolt Advanced 2 (2025)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Rear axle spacing : Thru-axle, 142 × 12 mmCheck your installed setup or its technical sheet. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Freehub body : Shimano HG, 11-speed road body (+1.85 mm)Check your installed setup or its technical sheet. Rotor interface, rear hub : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted rear tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (8 dimensions compared) Rear axle spacing (safety-critical): bike nothing on file · part Thru-axle, 142 × 12 mm — not on file Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Freehub body: bike nothing on file · part Shimano HG, 11-speed road body (+1.85 mm) — not on file Rotor interface, rear hub (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted rear tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Giant Roam 2 Disc (2021)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Rear axle spacing : Thru-axle, 142 × 12 mmCheck your installed setup or its technical sheet. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Freehub body : Shimano HG, 11-speed road body (+1.85 mm)Check your installed setup or its technical sheet. Rotor interface, rear hub : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted rear tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (8 dimensions compared) Rear axle spacing (safety-critical): bike nothing on file · part Thru-axle, 142 × 12 mm — not on file Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Freehub body: bike nothing on file · part Shimano HG, 11-speed road body (+1.85 mm) — not on file Rotor interface, rear hub (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted rear tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Giant Talon 2 (2025)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Rear axle spacing : Thru-axle, 142 × 12 mmCheck your installed setup or its technical sheet. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Freehub body : Shimano HG, 11-speed road body (+1.85 mm)Check your installed setup or its technical sheet. Rotor interface, rear hub : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted rear tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (8 dimensions compared) Rear axle spacing (safety-critical): bike nothing on file · part Thru-axle, 142 × 12 mm — not on file Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Freehub body: bike nothing on file · part Shimano HG, 11-speed road body (+1.85 mm) — not on file Rotor interface, rear hub (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted rear tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Giant Talon E+ (2026)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Rear axle spacing : Thru-axle, 142 × 12 mmCheck your installed setup or its technical sheet. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Freehub body : Shimano HG, 11-speed road body (+1.85 mm)Check your installed setup or its technical sheet. Rotor interface, rear hub : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted rear tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (8 dimensions compared) Rear axle spacing (safety-critical): bike nothing on file · part Thru-axle, 142 × 12 mm — not on file Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Freehub body: bike nothing on file · part Shimano HG, 11-speed road body (+1.85 mm) — not on file Rotor interface, rear hub (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted rear tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Giant TCX Advanced Pro 2 (2023)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Rear axle spacing : Thru-axle, 142 × 12 mmCheck your installed setup or its technical sheet. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Freehub body : Shimano HG, 11-speed road body (+1.85 mm)Check your installed setup or its technical sheet. Rotor interface, rear hub : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted rear tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (8 dimensions compared) Rear axle spacing (safety-critical): bike nothing on file · part Thru-axle, 142 × 12 mm — not on file Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Freehub body: bike nothing on file · part Shimano HG, 11-speed road body (+1.85 mm) — not on file Rotor interface, rear hub (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted rear tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Giant Trance X 29 2 (2022)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Rear axle spacing : Thru-axle, 142 × 12 mmCheck your installed setup or its technical sheet. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Freehub body : Shimano HG, 11-speed road body (+1.85 mm)Check your installed setup or its technical sheet. Rotor interface, rear hub : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted rear tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (8 dimensions compared) Rear axle spacing (safety-critical): bike nothing on file · part Thru-axle, 142 × 12 mm — not on file Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Freehub body: bike nothing on file · part Shimano HG, 11-speed road body (+1.85 mm) — not on file Rotor interface, rear hub (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted rear tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Giant XTC Jr 24 (2015)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Rear axle spacing : Thru-axle, 142 × 12 mmCheck your installed setup or its technical sheet. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Freehub body : Shimano HG, 11-speed road body (+1.85 mm)Check your installed setup or its technical sheet. Rotor interface, rear hub : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted rear tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (8 dimensions compared) Rear axle spacing (safety-critical): bike nothing on file · part Thru-axle, 142 × 12 mm — not on file Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Freehub body: bike nothing on file · part Shimano HG, 11-speed road body (+1.85 mm) — not on file Rotor interface, rear hub (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted rear tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Kona Sutra	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Rear axle spacing : Thru-axle, 142 × 12 mmCheck your installed setup or its technical sheet. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Freehub body : Shimano HG, 11-speed road body (+1.85 mm)Check your installed setup or its technical sheet. Rotor interface, rear hub : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted rear tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (8 dimensions compared) Rear axle spacing (safety-critical): bike nothing on file · part Thru-axle, 142 × 12 mm — not on file Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Freehub body: bike nothing on file · part Shimano HG, 11-speed road body (+1.85 mm) — not on file Rotor interface, rear hub (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted rear tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Liv Flourish 2 (2017)	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Rear axle spacing : Thru-axle, 142 × 12 mmCheck your installed setup or its technical sheet. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Freehub body : Shimano HG, 11-speed road body (+1.85 mm)Check your installed setup or its technical sheet. Rotor interface, rear hub : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted rear tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (8 dimensions compared) Rear axle spacing (safety-critical): bike nothing on file · part Thru-axle, 142 × 12 mm — not on file Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Freehub body: bike nothing on file · part Shimano HG, 11-speed road body (+1.85 mm) — not on file Rotor interface, rear hub (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted rear tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
State Bicycle Co. Core-Line Wulf	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Rear axle spacing : Thru-axle, 142 × 12 mmCheck your installed setup or its technical sheet. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Freehub body : Shimano HG, 11-speed road body (+1.85 mm)Check your installed setup or its technical sheet. Rotor interface, rear hub : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted rear tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (8 dimensions compared) Rear axle spacing (safety-critical): bike nothing on file · part Thru-axle, 142 × 12 mm — not on file Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Freehub body: bike nothing on file · part Shimano HG, 11-speed road body (+1.85 mm) — not on file Rotor interface, rear hub (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted rear tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Surly Disc Trucker 700c (2nd generation (2020 platform))	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Rear axle spacing : Thru-axle, 142 × 12 mmCheck your installed setup or its technical sheet. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Freehub body : Shimano HG, 11-speed road body (+1.85 mm)Check your installed setup or its technical sheet. Rotor interface, rear hub : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted rear tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (8 dimensions compared) Rear axle spacing (safety-critical): bike nothing on file · part Thru-axle, 142 × 12 mm — not on file Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Freehub body: bike nothing on file · part Shimano HG, 11-speed road body (+1.85 mm) — not on file Rotor interface, rear hub (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted rear tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)
Tern Quick Haul D8 Gen 1	Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part. Rear axle spacing : Thru-axle, 142 × 12 mmCheck your installed setup or its technical sheet. Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet. Freehub body : Shimano HG, 11-speed road body (+1.85 mm)Check your installed setup or its technical sheet. Rotor interface, rear hub : Center LockCheck your installed setup or its technical sheet. Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet. Electric assist system : No electric assistCheck your installed setup or its technical sheet. Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet. Fitted rear tyre width : 23–56 mmCheck your installed setup or its technical sheet. Why? The facts we compared (8 dimensions compared) Rear axle spacing (safety-critical): bike nothing on file · part Thru-axle, 142 × 12 mm — not on file Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file Freehub body: bike nothing on file · part Shimano HG, 11-speed road body (+1.85 mm) — not on file Rotor interface, rear hub (safety-critical): bike nothing on file · part Center Lock — not on file Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file Electric assist system (safety-critical): bike nothing on file · part No electric assist — not on file Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file Fitted rear tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file Sources: DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28) DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)

See all 21 bikes

Sources

The spec sheets we read. Every fact above cites one of them.

DT Swiss — P 1800 SPLINE db 23 — W0P1800AIDXSA21344 front and W0P1800NIDMSA21345 Shimano rear (tier 1, read 2026-09-28)
DT Swiss — Wheel/tyre compatibility and pressure — V2026.07, page 3 hooked TC table (tier 1, read 2026-09-28)