Open the shop

Electric · Gen 3

Tern GSD S10 Gen 3

Fit checks still open.

6 factory measurements on file · 1 confirmed by two independent sources. Fit is checked for each part.

Model year not documented

Representative silhouette: Longtail cargo. Explore the bike’s regions.
Explore in the workshop

Market: US

Find this bike

  • Local buying options are still being researched. Reference links do not confirm availability.

Confirm the year, build and size with the seller.

Explore its parts

On this device. No account needed.

Saving requires JavaScript. Bike details and seller links remain available without JavaScript.

Fit checks still open

6 factory measurements on file · 1 confirmed by two independent sources.

Fit is checked for each part.

See confirmed measurements
  • Bottom bracket shell

Find a part

Choose your bike’s documented factory build.

Documented specifications

The Tern GSD S10 Gen 3 is a cargo e-bike. Documented measurements and parts apply to their specific build, original market and size. Each configuration’s inventory carries its details and sources.

Rear axle spacingThru-axle, 148 × 12 mm (Boost)
Front axle spacingThru-axle, 110 × 15 mm (Boost)
Brake actuationHydraulic disc
Brake pad shape (fitted calipers)Magura MT C ABS, 4-piston — Performance pads only
Rear speeds10 speeds
Shift actuationMechanical (cable)
Chain standard10-speed (6.0 mm)
Brake actuation, rearHydraulic disc
Brake pad shape, rear caliperMagura MT C ABS, 4-piston — Performance pads only
Electric assist systemPedal assist

Confidence: every fact above comes from a single cited source — "derived" on our lattice; none is verified by a second independent publisher yet. A verdict that rests on a safety-critical fact therefore stops at "unknown" rather than "fits".

Fit measurements to check: Derailleur hanger · Maximum tyre width (frame) · Wheel size (ISO bead seat) · Brake mount, front · Brake mount, rear · Rotor interface (hubs) · Freehub body · Pedal thread. The sheets we read do not state them; until a source does, confirm these measurements before choosing a part that depends on them.

Why do so many verdicts on this bike read "unknown"?
Because a verdict needs the bike's measurement for every dimension a part requires, and 10 of the 16 required measurements are not on file. "Unknown" means we could not check — not that it fits, and not that it does not.
Will the verdicts change?
Yes. When a second independent source confirms a measurement — or a first one states a missing one — the verdicts are recomputed from the new facts. Nothing on this page is typed by hand.

Regions of this bike

Fit measurements to check

  • Derailleur hanger
  • Maximum tyre width (frame)
  • Wheel size (ISO bead seat)
  • Brake mount, front
  • Brake mount, rear
  • Rotor interface (hubs)
  • Freehub body
  • Pedal thread

Sources

The spec sheets we read. Every fact above cites one of them.

Source limitations: Current Canadian Gen3 identity is documented; model year is unstated, not a legacy placeholder. Standard 545 Wh battery and Smart System. Replacement-specific tyre dimensions, rotor interface, brake mounts, exact axle drawings, hanger, cockpit clamps, chainring and retail SKUs remain unconfirmed. Preserve the separate quarantined Gen1 record. Hydraulic actuation corroborated against the exact Magura MT C ABS manual. Genuine Magura 9.P Performance 2701627 is supported for the documented MT C ABS calipers. Ordinary MT four-piston shape alone does not establish ABS approval. Required Gen 3 chain link count, chainring interface and Canadian tyre ETRTO remain unconfirmed; older GSD generations do not establish them. The exact Gen 3 support documents do not provide a required link count or a complete chain service SKU. Give a Canadian Tern dealer the bike’s Service Tag for its approved finished replacement; 136-link retail packs and Gen 1/2 service chains are not established for this build.

The shop · Atelier 700