Parts

Threaded and press-fit bottom brackets by shell standard, with the crank spindle each provides, checked against the shell on file for every bike.

Disc brake calipers by mount standard and actuation, checked against the brake mounts on file for every bike.

Disc and rim brake pads by caliper family, checked against the caliper on file for every bike in the fleet.

Every cassette in the Atelier 700 catalogue with its freehub body, speed count and largest-cog requirement, checked against every bike in the fleet.

Chain guides by ISCG tab standard, checked against the tabs on file for every bike.

Every chain in the Atelier 700 catalogue by speed standard, with the compatibility requirement spelled out and checked against every bike in the fleet.

Cranksets by spindle standard and chainrings by bolt circle, checked link by link against the bottom bracket on file for every bike.

Rear derailleurs by speed count and actuation, each checked against the shifting on file for every bike and providing the cog limit cassettes require.

Forks by steerer, axle, brake mount and geometry. Each requirement is checked against the selected bike.

Drop and riser handlebars by stem clamp diameter, checked against the stem on file for every bike; bar tape is universal.

Headsets by S.H.I.S. upper and lower standard, checked against the head tube on file for every bike.

Pedals by spindle thread, checked against the crank thread on file for every bike.

Disc brake rotors from 140 to 220 mm, Center Lock and 6-bolt, each checked against the rotor maximum and hub interface on file for every bike.

Saddles by rail section and seatpost-clamp interface, with the exact width identified.

Seat collars by seat tube diameter, checked against the collar size on file for every bike.

Seatposts and dropper posts by diameter, shape and routing, checked against the seat tube on file for every bike.

Shift controls by speed count, actuation and handlebar attachment.

Stems by handlebar clamp diameter and steerer clamp, checked against the cockpit on file for every bike.

Replacement axles by position, diameter, thread, usable length and head seat.

Inner tubes by ISO wheel size, checked against the wheel size on file for every bike.

Road, gravel, mountain and kids tyres by ISO wheel size and width, each checked against the wheel size and tyre clearance on file for every bike.

Front and rear wheels by diameter, axle, brake interface, tyre approval and intended use.

Chain lube, multi-tools, tyre levers and bottle cages: universal parts with zero fit requirements, buyable for every bike in the fleet.