Atelier 700Open the shop

Mountain · 2022

Giant Trance X 29 2

We have not verified this bike yet.

9 of the 16 measurements on file · 0 verified. Fit is checked for each part.

Representative silhouette: Trail full suspension. Explore the bike’s regions.
Explore in the workshop

Shopping from Canada

Find this bike

Confirm the year, build and size with the seller.

Explore its parts

On this device. No account needed.

Saving requires JavaScript. Bike details and seller links remain available without JavaScript.

We have not verified this bike yet

9 of the 16 measurements are on file; 0 confirmed by two independent sources.

A documented replacement can be recommended even while unrelated bike measurements are missing.

Find a part

A build of this bike is not yet documented for your market. Its regions and sources remain available below.

Read specifications from other markets

These specifications describe another market. They do not confirm your bike’s build or fitment.

Documented specifications

United States · Giant Trance X 29 2
These details describe this reference build. They do not automatically apply to another market or build.

The Giant Trance X 29 2 (2022) is a trail mountain bike — representative silhouette: Trail full-suspension. We have read 2 specification sheets (Giant Bicycles) and recorded 17 fit facts from them. 9 of the 16 measurements a trail mountain bike needs to answer fit questions are on file; 0 are confirmed by two independent sources. Where a measurement is missing, we say so below — we do not guess.

Front derailleur mountNo front derailleur mount (1x only)
Rear axle spacingThru-axle, 148 × 12 mm (Boost)
Seatpost diameter30.9 mm
Seatpost shapeRound
Maximum tyre width (frame)63.5 mm
Wheel size (ISO bead seat)700c / 29" (ISO 622)
Maximum chainring34 t
Front axle spacingThru-axle, 110 × 15 mm (Boost)
Brake actuationHydraulic disc
Freehub bodyShimano HG, 8/9/10-speed body (also 11/12-speed MTB HG cassettes)
Rear speeds12 speeds
Shift actuationMechanical (cable)
Crank spindleSRAM DUB (28.99 mm)
Chain standard12-speed HG+ / Eagle (5.25 mm)
Tubeless-ready rimsTubeless-ready
Stem bar-clamp diameter (fitted stem)35 mm
Handlebar clamp diameter (fitted bar)35 mm

Confidence: every fact above comes from a single cited source — "derived" on our lattice; none is verified by a second independent publisher yet. A verdict that rests on a safety-critical fact therefore stops at "unknown" rather than "fits".

Not on file (required for a trail mountain bike): Bottom bracket shell · Derailleur hanger · Brake mount, front · Brake mount, rear · Rotor interface (hubs) · Brake pad shape (fitted calipers) · Pedal thread. The sheets we read do not state them; until a source does, confirm these measurements before choosing a part that depends on them.

Why do so many verdicts on this bike read "unknown"?
Because a verdict needs the bike's measurement for every dimension a part requires, and 7 of the 16 required measurements are not on file. "Unknown" means we could not check — not that it fits, and not that it does not.
Will the verdicts change?
Yes. When a second independent source confirms a measurement — or a first one states a missing one — the verdicts are recomputed from the new facts. Nothing on this page is typed by hand.

Regions of this bike

Not on file (required)

  • Bottom bracket shell
  • Derailleur hanger
  • Brake mount, front
  • Brake mount, rear
  • Rotor interface (hubs)
  • Brake pad shape (fitted calipers)
  • Pedal thread

Sources

The spec sheets we read. Every fact above cites one of them.

Source limitations: Left absent: steerer, brake mounts, rotor interface, max rotor (Tektro M745 rotors sizes are not stated), bb_shell ('SRAM DUB, press fit' without the shell standard).

The shop · Atelier 700