Atelier 700Open the shop

Giant Trance X 29 2 (2022)

We have not verified this bike yet

9 of the 16 measurements are on file; 0 confirmed by two independent sources. Without enough evidence, fit stays “unknown.”

Only universal parts (lube, tools, bar tape) are offered for this bike until verification.

Representative silhouette: Trail full suspension. Explore the bike’s regions.

Find this bike

Confirm the year, build and size with the seller.

The Giant Trance X 29 2 (2022) is a trail mountain bike — representative silhouette: Trail full-suspension. We have read 1 specification sheet (Giant Bicycles) and recorded 17 fit facts from it. 9 of the 16 measurements a trail mountain bike needs to answer fit questions are on file; 0 are confirmed by two independent sources. Where a measurement is missing, we say so below — we do not guess.

Front derailleur mountNo front derailleur mount (1x only)
Rear axle spacingThru-axle, 148 × 12 mm (Boost)
Seatpost diameter30.9 mm
Seatpost shapeRound
Maximum tyre width (frame)63.5 mm
Wheel size (ISO bead seat)700c / 29" (ISO 622)
Maximum chainring34 t
Front axle spacingThru-axle, 110 × 15 mm (Boost)
Brake actuationHydraulic disc
Freehub bodyShimano HG, 8/9/10-speed body (also 11/12-speed MTB HG cassettes)
Rear speeds12 speeds
Shift actuationMechanical (cable)
Crank spindleSRAM DUB (28.99 mm)
Chain standard12-speed HG+ / Eagle (5.25 mm)
Tubeless-ready rimsTubeless-ready
Stem bar-clamp diameter (fitted stem)35 mm
Handlebar clamp diameter (fitted bar)35 mm

Confidence: every fact above comes from a single cited source — "derived" on our lattice; none is verified by a second independent publisher yet. A verdict that rests on a safety-critical fact therefore stops at "unknown" rather than "fits".

Not on file (required for a trail mountain bike): Bottom bracket shell · Derailleur hanger · Brake mount, front · Brake mount, rear · Rotor interface (hubs) · Brake pad shape (fitted calipers) · Pedal thread. The sheet we read does not state them; until a source does, every fit question that needs one of these reads "unknown" — or "unknown — safety-critical" where a guess could hurt you.

Why do so many verdicts on this bike read "unknown"?
Because a verdict needs the bike's measurement for every dimension a part requires, and 7 of the 16 required measurements are not on file. "Unknown" means we could not check — not that it fits, and not that it does not.
Will the verdicts change?
Yes. When a second independent source confirms a measurement — or a first one states a missing one — the verdicts are recomputed from the new facts. Nothing on this page is typed by hand.

Regions of this bike

Not on file (required)

  • Bottom bracket shell
  • Derailleur hanger
  • Brake mount, front
  • Brake mount, rear
  • Rotor interface (hubs)
  • Brake pad shape (fitted calipers)
  • Pedal thread

Sources

The spec sheets we read. Every fact above cites one of them.

Source limitations: Left absent: steerer, brake mounts, rotor interface, max rotor (Tektro M745 rotors sizes are not stated), bb_shell ('SRAM DUB, press fit' without the shell standard).

The shop · Atelier 700