Atelier 700Open the shop

Front wheel parts for the Tern GSD S10 Gen 3

We have not verified this bike yet

6 of the 16 measurements are on file; 2 confirmed by two independent sources.

A documented replacement can be recommended even while unrelated bike measurements are missing.

Tern GSD S10 Gen 3

Parts menu — 1 part

  • DT Swiss P 1800 SPLINE db 23 front wheel, 12×100 mm

    Front wheel

    Fit checks required · confidence: inferred Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.

    • Wheel size (ISO bead seat) : 700c / 29" (ISO 622)Check your installed setup or its technical sheet.
    • Front axle spacing : Thru-axle, 100 × 12 mmDoes not match the documented build.
    • Rotor interface (hubs) : Center LockCheck your installed setup or its technical sheet.
    • Required riding-use category (ASTM) : 1 categoryCheck your installed setup or its technical sheet.
    • Electric assist system : No electric assistDoes not match the documented build.
    • Total operating mass (rider, bike and luggage) : ≤ 120 kgCheck your installed setup or its technical sheet.
    • Fitted front tyre width : 23–56 mmCheck your installed setup or its technical sheet.
    Why? The facts we compared (7 dimensions compared)
    • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
    • Front axle spacing (safety-critical): bike Thru-axle, 110 × 15 mm (Boost) (single-source) · part Thru-axle, 100 × 12 mm — mismatch
    • Rotor interface (hubs) (safety-critical): bike nothing on file · part Center Lock — not on file
    • Required riding-use category (ASTM) (safety-critical): bike nothing on file · part 1 category — not on file
    • Electric assist system (safety-critical): bike Pedal assist (single-source) · part No electric assist — mismatch
    • Total operating mass (rider, bike and luggage) (safety-critical): bike nothing on file · part ≤ 120 kg — not on file
    • Fitted front tyre width (safety-critical): bike nothing on file · part 23–56 mm — not on file

    Sources:

    View specifications

Slots in this region

  • Front wheel
  • Front thru-axle

The front wheel of the Tern GSD S10 Gen 3: 2 slots — Front wheel and Front thru-axle. 1 fit fact on file for this region. The parts menu below lists every catalogued part that belongs here with its computed verdict — fits, fits with adapter, does not fit or unknown — and why.

Front axle spacingThru-axle, 110 × 15 mm (Boost) (single-source)
What does "unknown" mean on this page?
That we do not have, on file, the bike measurement this part needs. It is not a quiet "yes": until the measurement is on file, we do not sell the part for this bike.

Sources

The shop · Atelier 700