Open the shop

SRAM · RT-CLN-X-A2 180 6B

SRAM CenterLine X rotor 180 mm, 6-bolt

SRAM brake rotor. Needs from your bike: Hub rotor interface at the selected position and Maximum rotor at the selected position.

Start with your bike

Will this part fit my bike?

Choose a bike to check its fit. Without one, you are browsing product references.

My bike is missing

Find this part

Affiliate links. Atelier 700 earns a commission on purchases made through these links. As an Amazon Associate, we earn from qualifying purchases.

Choose the right variant and check the fit for your bike.

The SRAM CenterLine X rotor 180 mm, 6-bolt is a brake rotor (component). It requires 2 things of a bike — Hub rotor interface at the selected position and Maximum rotor at the selected position — read from SRAM. On every bike page its verdict is computed from those requirements against the bike's cited facts: when a fact is missing the answer is "unknown", never a guess.

Requires — Hub rotor interface at the selected position6-bolt (ISO)
Requires — Maximum rotor at the selected position≥ 180 mm

Mounting requirements to check: Hub rotor interface at the selected position and Maximum rotor at the selected position. Compatibility requires bike measurements confirmed by two independent sources. Otherwise, the verdict shows "Fit checks required" with the specific checks to complete.

Does this part fit my bike?
Find your bike in the "Front brake" and "Rear brake" sections under "Fit, bike by bike" below. Choose the position you need to check: a front result does not confirm rear fit. The verdict there is computed from this part's requirements against the bike's cited facts — with its confidence and sources.
What does "does not fit" mean here?
That a fact on file for the bike contradicts a requirement of this part — a confident no, with both values shown.

Standards

  • 6-bolt (ISO)
  • ≥ 180 mm

Needs from your bike: Hub rotor interface at the selected position: 6-bolt (ISO) · Maximum rotor at the selected position: ≥ 180 mm

Brake rotor

Fit, bike by bike

Front brake

0 fit · 32 unknown

Brompton C Line 12-speedFit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Canyon Grail CF SL 7Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Canyon Ultimate CF 7Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Defy Advanced 2 (2025)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Defy Advanced 2 (2026)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Escape 3 (2024)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Fathom 29 2 (2022)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Glory Advanced (2025)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Propel Advanced 2 (2027)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Reign 29 2 (2021)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Revolt 2 (2026)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Revolt Advanced 2 (2025)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Roam 2 Disc (2021)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Talon 1 (2027)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Talon 2 (2025)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Talon E+ (2026)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant TCX Advanced Pro 2 (2023)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Trance X 29 2 (2022)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant XTC Jr 24 (2015)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Kona Process 134Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

See all 32 bikes
Kona SutraFit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Liv Flourish 2 (2017)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Specialized Diverge E5 Shimano Claris (2025)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Specialized Rockhopper Sport CUESFit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

State Bicycle Co. Core-Line WulfFit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Surly Disc Trucker 700cFit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Tern GSD S10 Gen 3Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Tern Quick Haul D8 Gen 1Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Trek Domane AL 2 Gen 4Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Trek FX 2 (Gen 4)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Trek Marlin 5 Gen 3Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

woom GO 4Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface (hubs) (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, front (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Rear brake

0 fit · 32 unknown

Brompton C Line 12-speedFit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Canyon Grail CF SL 7Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Canyon Ultimate CF 7Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Defy Advanced 2 (2025)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Defy Advanced 2 (2026)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Escape 3 (2024)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Fathom 29 2 (2022)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Glory Advanced (2025)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Propel Advanced 2 (2027)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Reign 29 2 (2021)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Revolt 2 (2026)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Revolt Advanced 2 (2025)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Roam 2 Disc (2021)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Talon 1 (2027)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Talon 2 (2025)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Talon E+ (2026)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant TCX Advanced Pro 2 (2023)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant Trance X 29 2 (2022)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Giant XTC Jr 24 (2015)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Kona Process 134Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

See all 32 bikes
Kona SutraFit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Liv Flourish 2 (2017)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Specialized Diverge E5 Shimano Claris (2025)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Specialized Rockhopper Sport CUESFit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

State Bicycle Co. Core-Line WulfFit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Surly Disc Trucker 700cFit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Tern GSD S10 Gen 3Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Tern Quick Haul D8 Gen 1Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Trek Domane AL 2 Gen 4Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Trek FX 2 (Gen 4)Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Trek Marlin 5 Gen 3Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

woom GO 4Fit checks required · confidence: single-source Compatibility is not confirmed. Verify the listed mounting requirements before buying or installing this part.
Why? The facts we compared (2 dimensions compared)
  • Rotor interface, rear hub (safety-critical): bike nothing on file · part 6-bolt (ISO) — not on file
  • Maximum rotor, rear (safety-critical): bike nothing on file · part ≥ 180 mm — not on file

Sources:

Sources

The spec sheets we read. Every fact above cites one of them.

The shop · Atelier 700