Open the shop

Gravel & mixed roads

Canyon Grail CF SL 7

Fit checks still open.

10 factory measurements on file · 1 confirmed by two independent sources. Fit is checked for each part.

Model year not documented

Representative silhouette: Gravel. Explore the bike’s regions.
Explore in the workshop

Market: UK

Find this bike

Affiliate links. Atelier 700 earns a commission on purchases made through these links. As an Amazon Associate, we earn from qualifying purchases.

Confirm the year, build and size with the seller.

Explore its parts

On this device. No account needed.

Saving requires JavaScript. Bike details and seller links remain available without JavaScript.

Fit checks still open

10 factory measurements on file · 1 confirmed by two independent sources. Factory measurements can vary by build, original market and size.

Fit is checked for each part.

See confirmed measurements
  • Chain standard

Find a part

Choose your bike’s documented factory build.

Documented specifications

United States · Canyon Grail CF SL 7
These details describe this reference build. They do not automatically apply to another market or build.

The Canyon Grail CF SL 7 is a gravel bike. Documented measurements and parts apply to their specific build, original market and size. Each configuration’s inventory carries its details and sources.

Bottom bracket shellPress-fit BB86 (41 mm bore, 86.5 mm)
Rear axle spacingThru-axle, 142 × 12 mm
Maximum tyre width (frame)42 mm
Wheel size (ISO bead seat)700c / 29" (ISO 622)
Front axle spacingThru-axle, 100 × 12 mm
Rotor interface (hubs)Center Lock
Brake actuationHydraulic disc
Freehub bodyShimano HG, 11-speed road body (+1.85 mm)
Rear speeds12 speeds
Shift actuationMechanical (cable)
Crank spindleShimano Hollowtech II, 24 mm
Chain standard12-speed HG+ / Eagle (5.25 mm)
Rim internal width24 mm

Confidence: every fact above comes from a single cited source — "derived" on our lattice; none is verified by a second independent publisher yet. A verdict that rests on a safety-critical fact therefore stops at "unknown" rather than "fits".

Fit measurements to check: Bottom bracket shell · Derailleur hanger · Rear axle spacing · Seatpost diameter · Maximum tyre width (frame) · Wheel size (ISO bead seat) · Front axle spacing · Brake mount, front · Brake mount, rear · Rotor interface (hubs) · Brake actuation · Brake pad shape (fitted calipers) · Freehub body · Rear speeds · Chain standard · Pedal thread. The sheets we read do not state them; until a source does, confirm these measurements before choosing a part that depends on them.

Why do so many verdicts on this bike read "unknown"?
Because a verdict needs the bike's measurement for every dimension a part requires, and 16 of the 16 required measurements are not on file. "Unknown" means we could not check — not that it fits, and not that it does not.
Will the verdicts change?
Yes. When a second independent source confirms a measurement — or a first one states a missing one — the verdicts are recomputed from the new facts. Nothing on this page is typed by hand.

Regions of this bike

Fit measurements to check

  • Bottom bracket shell
  • Derailleur hanger
  • Rear axle spacing
  • Seatpost diameter
  • Maximum tyre width (frame)
  • Wheel size (ISO bead seat)
  • Front axle spacing
  • Brake mount, front
  • Brake mount, rear
  • Rotor interface (hubs)
  • Brake actuation
  • Brake pad shape (fitted calipers)
  • Freehub body
  • Rear speeds
  • Chain standard
  • Pedal thread

Sources

The spec sheets we read. Every fact above cites one of them.

Source limitations: Left absent on purpose: steerer / headset (not stated), seatpost diameter (Canyon SP0096 is a proprietary D-section post; diameter not stated), brake mounts (not stated), derailleur hanger ('Not specified'), cockpit clamps (one-piece Canyon CP0045). Model year: Canyon does not print one on the product page; 2025 is the catalogue year the page was read in.

The shop · Atelier 700