Open the shop

Mountain · 2022

Giant Fathom 29 2

Fit checks still open.

9 factory measurements on file · 4 confirmed by two independent sources. Fit is checked for each part.

Representative silhouette: Trail hardtail. Explore the bike’s regions.
Explore in the workshop

Market: UK

Find this bike

Affiliate links. Atelier 700 earns a commission on purchases made through these links. As an Amazon Associate, we earn from qualifying purchases.

Confirm the year, build and size with the seller.

Explore its parts

On this device. No account needed.

Saving requires JavaScript. Bike details and seller links remain available without JavaScript.

Fit checks still open

9 factory measurements on file · 4 confirmed by two independent sources. Factory measurements can vary by build, original market and size.

Fit is checked for each part.

See confirmed measurements
  • Wheel size (ISO bead seat)
  • Brake actuation
  • Brake pad shape (fitted calipers)
  • Chain standard

Find a part

Choose your bike’s documented factory build.

Documented specifications

United States · Giant Fathom 29 2
These details describe this reference build. They do not automatically apply to another market or build.

The Giant Fathom 29 2 (2022) is a trail mountain bike. Documented measurements and parts apply to their specific build, original market and size. Each configuration’s inventory carries its details and sources.

Front derailleur mountNo front derailleur mount (1x only)
Seatpost diameter30.9 mm
Seatpost shapeRound
Dropper-post routingInternal (stealth) routing
Maximum tyre width (frame)63.5 mm
Wheel size (ISO bead seat)700c / 29" (ISO 622)
Maximum chainring32 t
Front axle spacingThru-axle, 110 × 15 mm (Boost)
Brake actuationHydraulic disc
Brake pad shape (fitted calipers)Tektro / TRP 2-piston hydraulic & TRP mechanical (E10.11 pad)
Freehub bodyShimano HG, 8/9/10-speed body (also 11/12-speed MTB HG cassettes)
Rear speeds10 speeds
Shift actuationMechanical (cable)
Chain standard10-speed (6.0 mm)
Rim internal width30 mm
Tubeless-ready rimsTubeless-ready
Stem bar-clamp diameter (fitted stem)35 mm
Handlebar clamp diameter (fitted bar)35 mm

Confidence: every fact above comes from a single cited source — "derived" on our lattice; none is verified by a second independent publisher yet. A verdict that rests on a safety-critical fact therefore stops at "unknown" rather than "fits".

Fit measurements to check: Bottom bracket shell · Derailleur hanger · Rear axle spacing · Brake mount, front · Brake mount, rear · Rotor interface (hubs) · Pedal thread. The sheets we read do not state them; until a source does, confirm these measurements before choosing a part that depends on them.

Why do so many verdicts on this bike read "unknown"?
Because a verdict needs the bike's measurement for every dimension a part requires, and 7 of the 16 required measurements are not on file. "Unknown" means we could not check — not that it fits, and not that it does not.
Will the verdicts change?
Yes. When a second independent source confirms a measurement — or a first one states a missing one — the verdicts are recomputed from the new facts. Nothing on this page is typed by hand.

Regions of this bike

Fit measurements to check

  • Bottom bracket shell
  • Derailleur hanger
  • Rear axle spacing
  • Brake mount, front
  • Brake mount, rear
  • Rotor interface (hubs)
  • Pedal thread

Sources

The spec sheets we read. Every fact above cites one of them.

Source limitations: Left absent: rear_spacing (hubs line says only 'alloy, open-race sealed bearings'), steerer, brake mounts, rotor interface, max rotor, bb_shell ('Praxis, press fit' without the shell standard).

The shop · Atelier 700