Atelier 700Open the shop

Surly Disc Trucker thru-axle fork 700c, black, FK1479

Surly fork. Needs from your bike: Wheel size (ISO bead seat), Steerer tube, Front axle spacing, Brake mount, front, Fitted front tyre width, Approved replacement fork axle-to-crown length, Approved replacement fork offset, Minimum required fork steerer length, Approved replacement fork assembly interface and Fitted front rotor diameter.

The Surly Disc Trucker thru-axle fork 700c, black, FK1479 is a fork (component). It requires 10 things of a bike — Wheel size (ISO bead seat), Steerer tube, Front axle spacing, Brake mount, front, Fitted front tyre width, Approved replacement fork axle-to-crown length, Approved replacement fork offset, Minimum required fork steerer length, Approved replacement fork assembly interface and Fitted front rotor diameter — read from Surly. On every bike page its verdict is computed from those requirements against the bike's cited facts: when a fact is missing the answer is "unknown", never a guess.

Requires — Wheel size (ISO bead seat)700c / 29" (ISO 622)
Requires — Steerer tube1-1/8" straight threadless
Requires — Front axle spacingThru-axle, 100 × 12 mm
Requires — Brake mount, frontRear-standard flat mount on a fork (Surly Disc Trucker)
Requires — Fitted front tyre width≤ 47 mm
Requires — Approved replacement fork axle-to-crown length390 mm
Requires — Approved replacement fork offset45 mm
Requires — Minimum required fork steerer length≤ 350 mm
Requires — Approved replacement fork assembly interfaceSurly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset
Requires — Fitted front rotor diameter140 mm

Steerer tube, Front axle spacing, Brake mount, front, Fitted front tyre width, Approved replacement fork axle-to-crown length, Approved replacement fork offset, Minimum required fork steerer length, Approved replacement fork assembly interface and Fitted front rotor diameter are safety-critical: a wrong answer could hurt you, so we say "fits" only when the bike's fact is confirmed by two independent sources. With one source the honest answer is "unknown"; with none it is "unknown — safety-critical".

Does this part fit my bike?
Find your bike under "Fits these bikes" below, or open your bike's "Fork" region page. The verdict there is computed from this part's requirements against the bike's cited facts — with its confidence and sources.
What does "does not fit" mean here?
That a fact on file for the bike contradicts a requirement of this part — a confident no, with both values shown.

Standards

  • 700c / 29" (ISO 622)
  • 1-1/8" straight threadless
  • Thru-axle, 100 × 12 mm
  • Rear-standard flat mount on a fork (Surly Disc Trucker)
  • ≤ 47 mm
  • 390 mm
  • 45 mm
  • ≤ 350 mm
  • Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset
  • 140 mm

Needs from your bike: Steerer tube: 1-1/8" straight threadless · Wheel size (ISO bead seat): 700c / 29" (ISO 622) · Front axle spacing: Thru-axle, 100 × 12 mm · Approved replacement fork offset: 45 mm · Brake mount, front: Rear-standard flat mount on a fork (Surly Disc Trucker) · Fitted front tyre width: ≤ 47 mm · Approved replacement fork axle-to-crown length: 390 mm · Approved replacement fork assembly interface: Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset · Fitted front rotor diameter: 140 mm · Minimum required fork steerer length: ≤ 350 mm

Fork

Find this part

Choose the right variant and check the fit for your bike.

Fits these bikes

Brompton C Line 12-speedunknown — safety-critical · confidence: single-source We can't answer this yet, and this is one where a guess could hurt you.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike 16" Brompton / 16 × 1 3/8 (ISO 349) (single-source) · part 700c / 29" (ISO 622) — mismatch
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Canyon Grail CF SL 7unknown — safety-critical · confidence: single-source We can't answer this yet, and this is one where a guess could hurt you.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike 700c / 29" (ISO 622) (single-source) · part 700c / 29" (ISO 622) — match
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike Thru-axle, 100 × 12 mm (single-source) · part Thru-axle, 100 × 12 mm — match
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Canyon Ultimate CF 7unknown — safety-critical · confidence: single-source We can't answer this yet, and this is one where a guess could hurt you.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike 700c / 29" (ISO 622) (single-source) · part 700c / 29" (ISO 622) — match
  • Steerer tube (safety-critical): bike 1-1/4" straight (single-source) · part 1-1/8" straight threadless — mismatch
  • Front axle spacing (safety-critical): bike Thru-axle, 100 × 12 mm (single-source) · part Thru-axle, 100 × 12 mm — match
  • Brake mount, front (safety-critical): bike Flat mount (single-source) · part Rear-standard flat mount on a fork (Surly Disc Trucker) — mismatch
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant Defy Advanced 2 (2025)unknown — safety-critical · confidence: single-source We can't answer this yet, and this is one where a guess could hurt you.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike 700c / 29" (ISO 622) (single-source) · part 700c / 29" (ISO 622) — match
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike Thru-axle, 100 × 12 mm (single-source) · part Thru-axle, 100 × 12 mm — match
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant Escape 3 (2024)unknown — safety-critical · confidence: single-source We can't answer this yet, and this is one where a guess could hurt you.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike 700c / 29" (ISO 622) (single-source) · part 700c / 29" (ISO 622) — match
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike Cantilever / V-brake posts (single-source) · part Rear-standard flat mount on a fork (Surly Disc Trucker) — mismatch
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant Fathom 29 2 (2022)unknown — safety-critical · confidence: single-source We can't answer this yet, and this is one where a guess could hurt you.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike 700c / 29" (ISO 622) (single-source) · part 700c / 29" (ISO 622) — match
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike Thru-axle, 110 × 15 mm (Boost) (single-source) · part Thru-axle, 100 × 12 mm — mismatch
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant Glory Advanced (2025)unknown — safety-critical · confidence: single-source We can't answer this yet, and this is one where a guess could hurt you.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike 650b / 27.5" (ISO 584) (single-source) · part 700c / 29" (ISO 622) — mismatch
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike Thru-axle, 110 × 20 mm (Boost / DH) (single-source) · part Thru-axle, 100 × 12 mm — mismatch
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant Propel Advanced 2 (2027)unknown — safety-critical · confidence: single-source We can't answer this yet, and this is one where a guess could hurt you.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike 700c / 29" (ISO 622) (single-source) · part 700c / 29" (ISO 622) — match
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike Thru-axle, 100 × 12 mm (single-source) · part Thru-axle, 100 × 12 mm — match
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant Reign 29 2 (2021)unknown — safety-critical · confidence: single-source We can't answer this yet, and this is one where a guess could hurt you.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike 700c / 29" (ISO 622) (single-source) · part 700c / 29" (ISO 622) — match
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike Thru-axle, 110 × 15 mm (Boost) (single-source) · part Thru-axle, 100 × 12 mm — mismatch
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant Revolt Advanced 2 (2025)unknown — safety-critical · confidence: single-source We can't answer this yet, and this is one where a guess could hurt you.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike 700c / 29" (ISO 622) (single-source) · part 700c / 29" (ISO 622) — match
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant Roam 2 Disc (2021)unknown — safety-critical · confidence: single-source We can't answer this yet, and this is one where a guess could hurt you.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike 700c / 29" (ISO 622) (single-source) · part 700c / 29" (ISO 622) — match
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant Talon 2 (2025)unknown — safety-critical · confidence: single-source We can't answer this yet, and this is one where a guess could hurt you.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike nothing on file · part 700c / 29" (ISO 622) — not on file
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike Thru-axle, 110 × 15 mm (Boost) (single-source) · part Thru-axle, 100 × 12 mm — mismatch
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant Talon E+ (2026)unknown — safety-critical · confidence: single-source We can't answer this yet, and this is one where a guess could hurt you.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike 700c / 29" (ISO 622) (single-source) · part 700c / 29" (ISO 622) — match
  • Steerer tube (safety-critical): bike Tapered 1-1/8" to 1-1/2" (single-source) · part 1-1/8" straight threadless — mismatch
  • Front axle spacing (safety-critical): bike Thru-axle, 110 × 15 mm (Boost) (single-source) · part Thru-axle, 100 × 12 mm — mismatch
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant TCX Advanced Pro 2 (2023)unknown — safety-critical · confidence: single-source We can't answer this yet, and this is one where a guess could hurt you.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike 700c / 29" (ISO 622) (single-source) · part 700c / 29" (ISO 622) — match
  • Steerer tube (safety-critical): bike Tapered 1-1/4" to 1-1/2" (single-source) · part 1-1/8" straight threadless — mismatch
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant Trance X 29 2 (2022)unknown — safety-critical · confidence: single-source We can't answer this yet, and this is one where a guess could hurt you.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike 700c / 29" (ISO 622) (single-source) · part 700c / 29" (ISO 622) — match
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike Thru-axle, 110 × 15 mm (Boost) (single-source) · part Thru-axle, 100 × 12 mm — mismatch
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Giant XTC Jr 24 (2015)unknown — safety-critical · confidence: single-source We can't answer this yet, and this is one where a guess could hurt you.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike 24" (ISO 507) (single-source) · part 700c / 29" (ISO 622) — mismatch
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike Cantilever / V-brake posts (single-source) · part Rear-standard flat mount on a fork (Surly Disc Trucker) — mismatch
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Kona Sutra (2025)unknown — safety-critical · confidence: single-source We can't answer this yet, and this is one where a guess could hurt you.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike 700c / 29" (ISO 622) (single-source) · part 700c / 29" (ISO 622) — match
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike Thru-axle, 100 × 12 mm (single-source) · part Thru-axle, 100 × 12 mm — match
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Liv Flourish 2 (2017)unknown — safety-critical · confidence: single-source We can't answer this yet, and this is one where a guess could hurt you.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike 700c / 29" (ISO 622) (single-source) · part 700c / 29" (ISO 622) — match
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike Cantilever / V-brake posts (single-source) · part Rear-standard flat mount on a fork (Surly Disc Trucker) — mismatch
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
State Bicycle Co. Core-Line (2024)unknown — safety-critical · confidence: single-source We can't answer this yet, and this is one where a guess could hurt you.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike 700c / 29" (ISO 622) (single-source) · part 700c / 29" (ISO 622) — match
  • Steerer tube (safety-critical): bike nothing on file · part 1-1/8" straight threadless — not on file
  • Front axle spacing (safety-critical): bike nothing on file · part Thru-axle, 100 × 12 mm — not on file
  • Brake mount, front (safety-critical): bike nothing on file · part Rear-standard flat mount on a fork (Surly Disc Trucker) — not on file
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file
Surly Disc Trucker 700cunknown — safety-critical · confidence: single-source We can't answer this yet, and this is one where a guess could hurt you.
Why? The facts we compared (10 dimensions compared)
  • Wheel size (ISO bead seat): bike 700c / 29" (ISO 622) (single-source) · part 700c / 29" (ISO 622) — match
  • Steerer tube (safety-critical): bike 1-1/8" straight threadless (single-source) · part 1-1/8" straight threadless — match
  • Front axle spacing (safety-critical): bike Thru-axle, 100 × 12 mm (single-source) · part Thru-axle, 100 × 12 mm — match
  • Brake mount, front (safety-critical): bike Flat mount (single-source) · part Rear-standard flat mount on a fork (Surly Disc Trucker) — mismatch
  • Fitted front tyre width (safety-critical): bike nothing on file · part ≤ 47 mm — not on file
  • Approved replacement fork axle-to-crown length (safety-critical): bike nothing on file · part 390 mm — not on file
  • Approved replacement fork offset (safety-critical): bike nothing on file · part 45 mm — not on file
  • Minimum required fork steerer length (safety-critical): bike nothing on file · part ≤ 350 mm — not on file
  • Approved replacement fork assembly interface (safety-critical): bike nothing on file · part Surly Disc Trucker 700c thru-axle fork, 390 mm axle-to-crown / 45 mm offset — not on file
  • Fitted front rotor diameter (safety-critical): bike nothing on file · part 140 mm — not on file

See all 22 bikes

Sources

The spec sheets we read. Every fact above cites one of them.

The shop · Atelier 700